Phoenix Contact · Terminal Block
2702538 is a Phoenix Contact circuit breaker with Rated current Ie up to 41 A (IEC 60947-7-1); Tripping characteristic 10 mm; Rated operational voltage 800 V (IEC 60947-7-1). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Tripping characteristic10 mm
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Breaking capacity Icu/IcsCopper
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Breaking capacity Icu/Ics |
Copper |
| Tripping characteristic |
10 mm |
| Supply voltage |
24 V DC (SELV) |
| Frequency |
2.4 GHz |
| Rated speed |
10/100 Mbps |
| Mechanical |
| Dimensions (H x W x D) |
Outside dimensions |
| Weight |
375 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.2 mm² ... 1.5 mm² |
| Enclosure rating |
IP54 |
| Environment and compliance |
| Operating temperature |
0 °C ... 60 °C |
| Certifications |
CE, UL, cULus |
| Humidity |
5 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Terminal Block variants |
| Catalog number |
Tripping characteristic |
Breaking capacity Icu/Ics |
Rated operational voltage |
|
2702538 (this page) |
10 mm |
Copper |
800 V (IEC 60947-7-1) |
| 2702535 |
— |
— |
800 V (IEC 60947-7-1) |
| 2702501 |
8 mm |
Failure of the internal I/O supply I/O error message sent to the bus coupler |
800 V (IEC 60947-7-1) |
| 2702503 |
8 mm |
Failure of the internal I/O supply I/O error message sent to the bus coupler |
800 V (IEC 60947-7-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2702538 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 24 V DC (SELV) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2702538
Phoenix Contact 2702538 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2702538; verify the catalog number against your bill of materials before requesting a quotation.
- Terminal wire size: 0.2 mm² ... 1.5 mm² — Verify it in the project documentation before confirming the order.
- Rated current Ie: up to 41 A (IEC 60947-7-1) — Check this value against the nameplate of the installed unit before ordering.
- Humidity: 5 % ... 95 % (non-condensing) — Match it to the existing panel and upstream protection.
- Weight: 375 g — Record it with the other nameplate data when sourcing a replacement.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 2702538
Q.Which value is published under enclosure rating for catalog number 2702538?
For 2702538, enclosure rating is given as IP54. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 2702538, which weight entry should be checked?
The weight entry quoted above is 375 g. Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the breaking capacity Icu/Ics data for 2702538?
It is listed in the specification table for Phoenix Contact 2702538 as Copper. Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for 2702538?
Send the full catalog number 2702538, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2702538.
Q.How do I confirm compatibility of 2702538 before ordering?
Match the catalog number 2702538 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.