Phoenix Contact · Connection Cable
2700722 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Mechanical |
| Dimensions (H x W x D) |
for each connector |
| Weight |
119 g |
| Terminal wire size |
0.2 mm² ... 1.5 mm² |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
2700722 (this page) |
up to 4 A |
| 2700720 |
up to 4 A |
| 2701402 |
up to 4 A |
| 2701422 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2700722 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2700722
Phoenix Contact 2700722 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2700722; record the nameplate data of the unit being replaced before selecting an equivalent.
- Certifications: CE, UL, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Use it as the reference when cross-checking a current-production equivalent.
- Rated current Ie: up to 4 A — Verify it in the project documentation before confirming the order.
- Dimensions (H x W x D): for each connector — Check this value against the nameplate of the installed unit before ordering.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 2700722
Q.Before ordering 2700722, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP67 (IEC 60529). Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the weight data for 2700722?
It is listed in the specification table for Phoenix Contact 2700722 as 119 g. Confirm this figure against the unit currently in the panel.
Q.For 2700722, what does the specification table state about operating temperature?
The specification table lists operating temperature = -25...+80 °C (IEC 60068-2-1) for Phoenix Contact 2700722. Use the value as the reference when sourcing a current-production equivalent.
Q.Can the 2700722 replace the unit currently installed in my panel?
Compare catalog number 2700722 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 2700722?
Send the full catalog number 2700722, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2700722.