Phoenix Contact · Connection Cable
2700720 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Mechanical |
| Dimensions (H x W x D) |
for each connector |
| Weight |
121.8 g |
| Terminal wire size |
0.2 mm² ... 1.5 mm² |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
2700720 (this page) |
up to 4 A |
| 2700722 |
up to 4 A |
| 2701402 |
up to 4 A |
| 2701422 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2700720 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2700720
Phoenix Contact 2700720 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2700720; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Record it with the other nameplate data when sourcing a replacement.
- Terminal wire size: 0.2 mm² ... 1.5 mm² — Confirm the revision of the installed unit before a like-for-like replacement.
- Certifications: CE, UL, cULus — Use it as the reference when cross-checking a current-production equivalent.
- Enclosure rating: IP67 (IEC 60529) — Verify it in the project documentation before confirming the order.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 2700720
Q.For 2700720, what does the specification table state about terminal wire size?
The specification table lists terminal wire size = 0.2 mm² ... 1.5 mm² for Phoenix Contact 2700720. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under weight for catalog number 2700720?
For 2700720, weight is given as 121.8 g. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 2700720, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for 2700720?
Send the full catalog number 2700720, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2700720.
Q.How do I confirm compatibility of 2700720 before ordering?
Match the catalog number 2700720 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.