Phoenix Contact · HMI Panel
2403460 is a Phoenix Contact HMI panel with Resolution 800 x 480 Pixel(s) (WVGA); Supply voltage 24 V DC (IEC 60950-1); Enclosure rating IP65 (IEC 60529) front. It is used in machine operator panels, control cabinets, local HMI stations where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Resolution800 x 480 Pixel(s) (WVGA)
-
Supply voltage24 V DC (IEC 60950-1)
-
Enclosure ratingIP65 (IEC 60529) front
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 60950-1) |
| Power consumption |
typ. 19.2 W |
| I/O and communication |
| Resolution |
800 x 480 Pixel(s) (WVGA) |
| Mechanical |
| Dimensions (H x W x D) |
6 mm |
| Weight |
1800 g |
| Mounting |
Panel mount (IEC 60529) |
| Enclosure rating |
IP65 (IEC 60529) front |
| Backlight life |
70000 h |
| Touch type |
resistive or projective capacitive |
| Environment and compliance |
| Operating temperature |
0...+50 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact HMI Panel specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact HMI Panel variants |
| Catalog number |
Supply voltage |
|
2403460 (this page) |
24 V DC (IEC 60950-1) |
| 2403462 |
24 V DC (IEC 60950-1) |
| 2400453 |
24 V DC (IEC 60950-1) |
| 2400454 |
24 V DC (IEC 60950-1) |
Verify model-specific dimensions, terminals and installation requirements in the manufacturer documentation before selecting an alternative.
Where it sits in the control system
The 2403460 is the device-level element in a Phoenix Contact HMI panel installation. It receives the field signals and control supply listed above — 24 V DC (IEC 60950-1) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in machine operator panels, control cabinets, local HMI stations, where the unit is matched to the original catalog number and the enclosure provides Panel mount (IEC 60529) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2403460
Phoenix Contact 2403460 HMI Touch Panel. See the manufacturer product information for this catalog number.
- Enclosure rating: IP65 (IEC 60529) front — Match it to the existing panel and upstream protection.
- Resolution: 800 x 480 Pixel(s) (WVGA) — Record it with the other nameplate data when sourcing a replacement.
- Supply voltage: 24 V DC (IEC 60950-1) — Confirm the revision of the installed unit before a like-for-like replacement.
- Dimensions (H x W x D): 6 mm — Use it as the reference when cross-checking a current-production equivalent.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 2403460
Q.For 2403460, what does the specification table state about supply voltage?
The specification table lists supply voltage = 24 V DC (IEC 60950-1) for Phoenix Contact 2403460. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under operating temperature for catalog number 2403460?
For 2403460, operating temperature is given as 0...+50 °C (IEC 60068-2-1). Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 2403460, which dimensions (H x W x D) entry should be checked?
The dimensions (H x W x D) entry quoted above is 6 mm. Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for 2403460?
Send the full catalog number 2403460, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2403460.
Q.How do I confirm compatibility of 2403460 before ordering?
Match the catalog number 2403460 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.