Phoenix Contact · HMI Panel
2400455 is a Phoenix Contact HMI panel with Resolution 800 x 600 Pixel(s) (SVGA); Supply voltage 24 V DC (IEC 60950-1); Enclosure rating IP65 (IEC 60529) front. It is used in machine operator panels, control cabinets, local HMI stations where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Resolution800 x 600 Pixel(s) (SVGA)
-
Supply voltage24 V DC (IEC 60950-1)
-
Enclosure ratingIP65 (IEC 60529) front
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 60950-1) |
| Power consumption |
typ. 12 W |
| I/O and communication |
| Resolution |
800 x 600 Pixel(s) (SVGA) |
| Mechanical |
| Dimensions (H x W x D) |
width, height, depth 287 mm x 212 mm x 54 mm (Installation cutout) |
| Weight |
1900 g |
| Mounting |
Panel mount (IEC 60529) |
| Enclosure rating |
IP65 (IEC 60529) front |
| Backlight life |
50000 h |
| Touch type |
resistive or projective capacitive |
| Environment and compliance |
| Operating temperature |
0...+50 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact HMI Panel specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact HMI Panel variants |
| Catalog number |
Supply voltage |
|
2400455 (this page) |
24 V DC (IEC 60950-1) |
| 2400453 |
24 V DC (IEC 60950-1) |
| 2400454 |
24 V DC (IEC 60950-1) |
| 2400458 |
24 V DC (IEC 60950-1) |
Verify model-specific dimensions, terminals and installation requirements in the manufacturer documentation before selecting an alternative.
Where it sits in the control system
The 2400455 is the device-level element in a Phoenix Contact HMI panel installation. It receives the field signals and control supply listed above — 24 V DC (IEC 60950-1) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in machine operator panels, control cabinets, local HMI stations, where the unit is matched to the original catalog number and the enclosure provides Panel mount (IEC 60529) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2400455
Phoenix Contact 2400455 HMI Touch Panel. See the manufacturer product information for this catalog number.
- Supply voltage: 24 V DC (IEC 60950-1) — Record it with the other nameplate data when sourcing a replacement.
- Enclosure rating: IP65 (IEC 60529) front — Confirm the revision of the installed unit before a like-for-like replacement.
- Certifications: CE, UL, cULus — Use it as the reference when cross-checking a current-production equivalent.
- Touch type: resistive or projective capacitive — Verify it in the project documentation before confirming the order.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 2400455
Q.For 2400455, what does the specification table state about backlight life?
The specification table lists backlight life = 50000 h for Phoenix Contact 2400455. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under operating temperature for catalog number 2400455?
For 2400455, operating temperature is given as 0...+50 °C (IEC 60068-2-1). Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 2400455, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP65 (IEC 60529) front. Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for 2400455?
Send the full catalog number 2400455, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2400455.
Q.Can the 2400455 replace the unit currently installed in my panel?
Compare catalog number 2400455 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.