Phoenix Contact · System Cabling
2314503 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated torque |
0.5 Nm (Screw connection) |
| I/O and communication |
| Flame detection |
IEC 60332-1-2 (raw cable) |
| Mechanical |
| Weight |
4,211.3 g |
| Mounting |
DIN rail / panel |
| Terminal wire size |
Assembled shielded round cable |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Degree of protection |
≥ IP54 (Installation location) |
Values follow the Phoenix Contact System Cabling specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact System Cabling variants |
| Catalog number |
Mounting |
|
2314503 (this page) |
DIN rail / panel |
| 2314341 |
DIN rail / panel |
| 2314749 |
DIN rail / panel |
| 2319919 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2314503 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2314503
Phoenix Contact 2314503 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2314503; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Degree of protection: ≥ IP54 (Installation location) — Confirm the revision of the installed unit before a like-for-like replacement.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Use it as the reference when cross-checking a current-production equivalent.
- Rated torque: 0.5 Nm (Screw connection) — Verify it in the project documentation before confirming the order.
- Terminal wire size: Assembled shielded round cable — Check this value against the nameplate of the installed unit before ordering.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 2314503
Q.Which value is published under enclosure rating for catalog number 2314503?
For 2314503, enclosure rating is given as IP20 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 2314503, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the operating temperature data for 2314503?
It is listed in the specification table for Phoenix Contact 2314503 as 0...+55 °C (IEC 60068-2-1). Confirm this figure against the unit currently in the panel.
Q.Can the 2314503 replace the unit currently installed in my panel?
Compare catalog number 2314503 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 2314503?
Send the full catalog number 2314503, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2314503.