Phoenix Contact · System Cabling
2314341 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated torque |
0.5 Nm (Screw connection) |
| I/O and communication |
| Flame detection |
IEC 60332-1-2 (raw cable) |
| Mechanical |
| Weight |
426.7 g |
| Mounting |
DIN rail / panel |
| Terminal wire size |
Assembled shielded round cable |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Degree of protection |
≥ IP54 (Installation location) |
Values follow the Phoenix Contact System Cabling specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact System Cabling variants |
| Catalog number |
Mounting |
|
2314341 (this page) |
DIN rail / panel |
| 2314503 |
DIN rail / panel |
| 2314749 |
DIN rail / panel |
| 2319919 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2314341 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2314341
Phoenix Contact 2314341 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2314341; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Rated torque: 0.5 Nm (Screw connection) — Check this value against the nameplate of the installed unit before ordering.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Match it to the existing panel and upstream protection.
- Certifications: CE, UL, cULus — Record it with the other nameplate data when sourcing a replacement.
- Weight: 426.7 g — Confirm the revision of the installed unit before a like-for-like replacement.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 2314341
Q.For 2314341, what does the specification table state about degree of protection?
The specification table lists degree of protection = ≥ IP54 (Installation location) for Phoenix Contact 2314341. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under flame detection for catalog number 2314341?
For 2314341, flame detection is given as IEC 60332-1-2 (raw cable). Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 2314341, which weight entry should be checked?
The weight entry quoted above is 426.7 g. Compare it with the nameplate of the installed unit before ordering.
Q.How do I confirm compatibility of 2314341 before ordering?
Match the catalog number 2314341 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 2314341 replace the unit currently installed in my panel?
Compare catalog number 2314341 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.