Phoenix Contact 1792582 Terminal Block

SKU: 1792582
Regular price $377.47
In stock (64 units)
Free standard shipping on orders of $500 and above
100% secure payments
Industry leading quality

Phoenix Contact · Terminal Block

1792582 is a Phoenix Contact circuit breaker with Rated current Ie up to 41 A (IEC 60947-7-1); Tripping characteristic 7 mm; Rated operational voltage 800 V (IEC 60947-7-1). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.

  • Rated current Ieup to 41 A (IEC 60947-7-1)
  • Tripping characteristic7 mm
  • Rated operational voltage800 V (IEC 60947-7-1)
  • Breaking capacity Icu/Icshot-dip tin-plated

Specifications

Electrical
Rated current Ie up to 41 A (IEC 60947-7-1)
Rated operational voltage 800 V (IEC 60947-7-1)
Rated insulation voltage Ui 250 V
Rated impulse withstand Uimp 4.8 kV
Breaking capacity Icu/Ics hot-dip tin-plated
Tripping characteristic 7 mm
Frequency 2.21 kV
Rated torque 0.5 Nm ... 0.6 Nm
Rated speed 1 octave/min
Mechanical
Weight 16.93 g
Mounting 35 mm DIN rail (IEC 60715)
Terminal type Tin (4 µm - 8 µm Sn)
Terminal wire size -90 °
Environment and compliance
Operating temperature -40 °C ... 70 °C
Certifications CE, UL, cULus
Humidity 30 % ... 70 %

Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Phoenix Contact Terminal Block variants
Catalog number Tripping characteristic Breaking capacity Icu/Ics Rated operational voltage
1792582 (this page) 7 mm hot-dip tin-plated 800 V (IEC 60947-7-1)
1792524 7 mm hot-dip tin-plated 800 V (IEC 60947-7-1)
1792553 7 mm hot-dip tin-plated 800 V (IEC 60947-7-1)
1792870 7 mm hot-dip tin-plated 800 V (IEC 60947-7-1)

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The 1792582 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Phoenix Contact 1792582

Phoenix Contact 1792582 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1792582; verify the catalog number against your bill of materials before requesting a quotation.

  • Rated current Ie: up to 41 A (IEC 60947-7-1) — Confirm the revision of the installed unit before a like-for-like replacement.
  • Rated speed: 1 octave/min — Use it as the reference when cross-checking a current-production equivalent.
  • Humidity: 30 % ... 70 % — Verify it in the project documentation before confirming the order.
  • Weight: 16.93 g — Check this value against the nameplate of the installed unit before ordering.

Cross-check the ratings above with the installed device before confirming the order.

Common questions about 1792582

Q.Which value is published under humidity for catalog number 1792582?

For 1792582, humidity is given as 30 % ... 70 %. Compare it with the nameplate of the installed unit before ordering.

Q.Before ordering 1792582, which terminal type entry should be checked?

The terminal type entry quoted above is Tin (4 µm - 8 µm Sn). Confirm this figure against the unit currently in the panel.

Q.Where can I find the frequency data for 1792582?

It is listed in the specification table for Phoenix Contact 1792582 as 2.21 kV. Use the value as the reference when sourcing a current-production equivalent.

Q.How do I confirm compatibility of 1792582 before ordering?

Match the catalog number 1792582 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.

Q.Can the 1792582 replace the unit currently installed in my panel?

Compare catalog number 1792582 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.

Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.

Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. Express shipping is a fixed USD 50.00 for eligible destinations in the United States and Canada.

Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.

Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date the order is placed (order date), against defects in materials and workmanship under normal use.

This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.

★★★★★

No reviews yet. Be the first to review this product!