Phoenix Contact · Terminal Block
1754814 is a Phoenix Contact circuit breaker with Rated current Ie up to 41 A (IEC 60947-7-1); Tripping characteristic 10 mm; Rated operational voltage 800 V (IEC 60947-7-1). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Tripping characteristic10 mm
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Breaking capacity Icu/Icshot-dip tin-plated
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Rated insulation voltage Ui |
320 V |
| Rated impulse withstand Uimp |
4.8 kV |
| Breaking capacity Icu/Ics |
hot-dip tin-plated |
| Tripping characteristic |
10 mm |
| Frequency |
2.21 kV |
| Rated torque |
0.3 Nm |
| Rated speed |
1 octave/min |
| Mechanical |
| Weight |
5.84 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal type |
Tin (4 µm - 8 µm Sn) |
| Terminal wire size |
0 ° |
| Environment and compliance |
| Operating temperature |
-40 °C ... 70 °C |
| Certifications |
CE, UL, cULus |
| Humidity |
30 % ... 70 % |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Terminal Block variants |
| Catalog number |
Tripping characteristic |
Breaking capacity Icu/Ics |
Rated operational voltage |
|
1754814 (this page) |
10 mm |
hot-dip tin-plated |
800 V (IEC 60947-7-1) |
| 1754465 |
7 mm |
hot-dip tin-plated |
800 V (IEC 60947-7-1) |
| 1754504 |
7 mm |
hot-dip tin-plated |
800 V (IEC 60947-7-1) |
| 1754623 |
10 mm |
hot-dip tin-plated |
800 V (IEC 60947-7-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1754814 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1754814
Phoenix Contact 1754814 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1754814; verify the catalog number against your bill of materials before requesting a quotation.
- Rated torque: 0.3 Nm — Confirm the revision of the installed unit before a like-for-like replacement.
- Rated impulse withstand Uimp: 4.8 kV — Use it as the reference when cross-checking a current-production equivalent.
- Certifications: CE, UL, cULus — Verify it in the project documentation before confirming the order.
- Terminal wire size: 0 ° — Check this value against the nameplate of the installed unit before ordering.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1754814
Q.For 1754814, what does the specification table state about rated insulation voltage Ui?
The specification table lists rated insulation voltage Ui = 320 V for Phoenix Contact 1754814. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under rated impulse withstand Uimp for catalog number 1754814?
For 1754814, rated impulse withstand Uimp is given as 4.8 kV. Confirm this figure against the unit currently in the panel.
Q.Before ordering 1754814, which rated operational voltage entry should be checked?
The rated operational voltage entry quoted above is 800 V (IEC 60947-7-1). Use the value as the reference when sourcing a current-production equivalent.
Q.Can the 1754814 replace the unit currently installed in my panel?
Compare catalog number 1754814 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 1754814 before ordering?
Match the catalog number 1754814 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.