Phoenix Contact · Connection Cable
1682168 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated torque |
0.2 Nm (M8 connectors) |
| I/O and communication |
| Flame detection |
in accordance with UL 758/1581 FT2 |
| Mechanical |
| Weight |
23 kg/km |
| Terminal wire size |
32x 0.10 mm |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
1682168 (this page) |
up to 4 A |
| 1682045 |
up to 4 A |
| 1681127 |
up to 4 A |
| 1681198 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1682168 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1682168
Phoenix Contact 1682168 — Sensor or detector for object detection, distance measurement and status feedback on production lines. The figures below are taken from the specification table on this page for catalog number 1682168; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Rated torque: 0.2 Nm (M8 connectors) — Confirm the revision of the installed unit before a like-for-like replacement.
- Enclosure rating: IP67 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
- Rated current Ie: up to 4 A — Verify it in the project documentation before confirming the order.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Check this value against the nameplate of the installed unit before ordering.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1682168
Q.For 1682168, what does the specification table state about rated current Ie?
The specification table lists rated current Ie = up to 4 A for Phoenix Contact 1682168. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under rated torque for catalog number 1682168?
For 1682168, rated torque is given as 0.2 Nm (M8 connectors). Confirm this figure against the unit currently in the panel.
Q.Before ordering 1682168, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Use the value as the reference when sourcing a current-production equivalent.
Q.How do I confirm compatibility of 1682168 before ordering?
Match the catalog number 1682168 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1682168 replace the unit currently installed in my panel?
Compare catalog number 1682168 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.