Phoenix Contact · Connection Cable
1554212 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| I/O and communication |
| Flame detection |
in accordance with DIN UL-Style 20549 |
| Mechanical |
| Weight |
34 kg/km |
| Terminal wire size |
32x 0.10 mm |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
1554212 (this page) |
up to 4 A |
| 1554775 |
up to 4 A |
| 1553048 |
up to 4 A |
| 1559602 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1554212 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1554212
Phoenix Contact 1554212 — Sensor or detector for object detection, distance measurement and status feedback on production lines. The figures below are taken from the specification table on this page for catalog number 1554212; record the nameplate data of the unit being replaced before selecting an equivalent.
- Rated current Ie: up to 4 A — Match it to the existing panel and upstream protection.
- Weight: 34 kg/km — Record it with the other nameplate data when sourcing a replacement.
- Flame detection: in accordance with DIN UL-Style 20549 — Confirm the revision of the installed unit before a like-for-like replacement.
- Certifications: CE, UL, cULus — Use it as the reference when cross-checking a current-production equivalent.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1554212
Q.Where can I find the flame detection data for 1554212?
It is listed in the specification table for Phoenix Contact 1554212 as in accordance with DIN UL-Style 20549. Use the value as the reference when sourcing a current-production equivalent.
Q.For 1554212, what does the specification table state about weight?
The specification table lists weight = 34 kg/km for Phoenix Contact 1554212. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under certifications for catalog number 1554212?
For 1554212, certifications is given as CE, UL, cULus. Compare it with the nameplate of the installed unit before ordering.
Q.Can the 1554212 replace the unit currently installed in my panel?
Compare catalog number 1554212 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 1554212 before ordering?
Match the catalog number 1554212 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.