Phoenix Contact · Connection Cable
1553048 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
MountingRear mounting (Pg9, with flat nut)
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated torque |
2 Nm ... 3 Nm (Installation-side) |
| Mechanical |
| Weight |
13.5 g |
| Mounting |
Rear mounting (Pg9, with flat nut) |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
1553048 (this page) |
up to 4 A |
| 1554212 |
up to 4 A |
| 1554775 |
up to 4 A |
| 1559602 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1553048 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides Rear mounting (Pg9, with flat nut) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1553048
Phoenix Contact 1553048 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1553048; verify the catalog number against your bill of materials before requesting a quotation.
- Certifications: CE, UL, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
- Weight: 13.5 g — Use it as the reference when cross-checking a current-production equivalent.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Verify it in the project documentation before confirming the order.
- Enclosure rating: IP67 (IEC 60529) — Check this value against the nameplate of the installed unit before ordering.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1553048
Q.Which value is published under operating temperature for catalog number 1553048?
For 1553048, operating temperature is given as -25...+80 °C (IEC 60068-2-1). Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 1553048, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP67 (IEC 60529). Confirm this figure against the unit currently in the panel.
Q.Where can I find the weight data for 1553048?
It is listed in the specification table for Phoenix Contact 1553048 as 13.5 g. Use the value as the reference when sourcing a current-production equivalent.
Q.How do I confirm compatibility of 1553048 before ordering?
Match the catalog number 1553048 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1553048 replace the unit currently installed in my panel?
Compare catalog number 1553048 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.