Phoenix Contact · Connection Cable
1543223 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated torque |
0.4 Nm (M12 knurl) |
| Rated speed |
100 Mbps |
| Mechanical |
| Weight |
36.2 g |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Mounting |
Rated current Ie |
|
1543223 (this page) |
— |
up to 4 A |
| 1542745 |
Rear mounting (Pg9, with flat nut) |
up to 4 A |
| 1547478 |
DIN rail / panel |
up to 4 A |
| 1500868 |
— |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1543223 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1543223
Phoenix Contact 1543223 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1543223; verify the catalog number against your bill of materials before requesting a quotation.
- Certifications: CE, UL, cULus — Check this value against the nameplate of the installed unit before ordering.
- Enclosure rating: IP67 (IEC 60529) — Match it to the existing panel and upstream protection.
- Rated speed: 100 Mbps — Record it with the other nameplate data when sourcing a replacement.
- Weight: 36.2 g — Confirm the revision of the installed unit before a like-for-like replacement.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1543223
Q.For 1543223, what does the specification table state about rated speed?
The specification table lists rated speed = 100 Mbps for Phoenix Contact 1543223. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under certifications for catalog number 1543223?
For 1543223, certifications is given as CE, UL, cULus. Confirm this figure against the unit currently in the panel.
Q.Before ordering 1543223, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP67 (IEC 60529). Use the value as the reference when sourcing a current-production equivalent.
Q.Can the 1543223 replace the unit currently installed in my panel?
Compare catalog number 1543223 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 1543223 before ordering?
Match the catalog number 1543223 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.