Phoenix Contact · Connection Cable
1542745 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
MountingRear mounting (Pg9, with flat nut)
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Rated torque |
2 Nm ... 3 Nm (Installation-side) |
| Mechanical |
| Weight |
13.6 g |
| Mounting |
Rear mounting (Pg9, with flat nut) |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Mounting |
Rated current Ie |
|
1542745 (this page) |
Rear mounting (Pg9, with flat nut) |
up to 4 A |
| 1543223 |
— |
up to 4 A |
| 1547478 |
DIN rail / panel |
up to 4 A |
| 1500868 |
— |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1542745 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides Rear mounting (Pg9, with flat nut) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1542745
Phoenix Contact 1542745 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1542745; verify the catalog number against your bill of materials before requesting a quotation.
- Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
- Weight: 13.6 g — Record it with the other nameplate data when sourcing a replacement.
- Mounting: Rear mounting (Pg9, with flat nut) — Confirm the revision of the installed unit before a like-for-like replacement.
- Enclosure rating: IP67 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1542745
Q.Where can I find the rated current Ie data for 1542745?
It is listed in the specification table for Phoenix Contact 1542745 as up to 4 A. Check the revision of the installed unit if the catalog number has been superseded.
Q.For 1542745, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, cULus for Phoenix Contact 1542745. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under operating temperature for catalog number 1542745?
For 1542745, operating temperature is given as -25...+80 °C (IEC 60068-2-1). Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for 1542745?
Send the full catalog number 1542745, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1542745.
Q.How do I confirm compatibility of 1542745 before ordering?
Match the catalog number 1542745 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.