Phoenix Contact · Power Distributor
1517178 is a Phoenix Contact circuit breaker with Rated current Ie 12 A; Breaking capacity Icu/Ics Supply voltage Green LED; Enclosure rating IP20 (IEC 60529). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie12 A
-
Breaking capacity Icu/IcsSupply voltage Green LED
-
Enclosure ratingIP20 (IEC 60529)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Rated current Ie |
12 A |
| Breaking capacity Icu/Ics |
Supply voltage Green LED |
| Input voltage range |
85...264 V AC / 110...300 V DC (IEC 61010) |
| Efficiency |
up to 94 % |
| Rated torque |
0.4 Nm |
| I/O and communication |
| Flame detection |
DIN EN 50265 |
| Mechanical |
| Weight |
107.4 kg/km |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
19x 0.15 mm |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+70 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Power Distributor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Power Distributor variants |
| Catalog number |
Breaking capacity Icu/Ics |
|
1517178 (this page) |
Supply voltage Green LED |
| 1517181 |
Supply voltage Green LED |
| 1515879 |
— |
| 1516056 |
Supply voltage Green LED |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1517178 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the 12 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1517178
Phoenix Contact 1517178 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1517178; verify the catalog number against your bill of materials before requesting a quotation.
- Efficiency: up to 94 % — Use it as the reference when cross-checking a current-production equivalent.
- Rated torque: 0.4 Nm — Verify it in the project documentation before confirming the order.
- Operating temperature: -25...+70 °C (IEC 60068-2-1) — Check this value against the nameplate of the installed unit before ordering.
- Flame detection: DIN EN 50265 — Match it to the existing panel and upstream protection.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1517178
Q.Which value is published under efficiency for catalog number 1517178?
For 1517178, efficiency is given as up to 94 %. Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 1517178, which rated torque entry should be checked?
The rated torque entry quoted above is 0.4 Nm. Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the weight data for 1517178?
It is listed in the specification table for Phoenix Contact 1517178 as 107.4 kg/km. Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of 1517178 before ordering?
Match the catalog number 1517178 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1517178 replace the unit currently installed in my panel?
Compare catalog number 1517178 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.