Phoenix Contact · Power Distributor
1452783 is a Phoenix Contact industrial component with Rated current Ie 10 A; Enclosure rating IP20 (IEC 60529); Operating temperature -25...+70 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie10 A
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature-25...+70 °C (IEC 60068-2-1)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Rated current Ie |
10 A |
| Tripping characteristic |
7 mm |
| Input voltage range |
85...264 V AC / 110...300 V DC (IEC 61010) |
| Efficiency |
up to 94 % |
| Rated torque |
1 Nm |
| Mechanical |
| Weight |
230.8 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.14 mm² ... 1.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+70 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Power Distributor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Power Distributor variants |
| Catalog number |
Rated current Ie |
Mounting |
|
1452783 (this page) |
10 A |
35 mm DIN rail (IEC 60715) |
| 1452709 |
12 A |
35 mm DIN rail (IEC 60715) |
| 1452725 |
12 A |
35 mm DIN rail (IEC 60715) |
| 1452437 |
12 A |
35 mm DIN rail (IEC 60715) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1452783 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the 10 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1452783
Phoenix Contact 1452783 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1452783; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
- Enclosure rating: IP20 (IEC 60529) — Record it with the other nameplate data when sourcing a replacement.
- Weight: 230.8 g — Confirm the revision of the installed unit before a like-for-like replacement.
- Input voltage range: 85...264 V AC / 110...300 V DC (IEC 61010) — Use it as the reference when cross-checking a current-production equivalent.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1452783
Q.For 1452783, what does the specification table state about rated current Ie?
The specification table lists rated current Ie = 10 A for Phoenix Contact 1452783. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under tripping characteristic for catalog number 1452783?
For 1452783, tripping characteristic is given as 7 mm. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering 1452783, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for 1452783?
Send the full catalog number 1452783, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1452783.
Q.Can the 1452783 replace the unit currently installed in my panel?
Compare catalog number 1452783 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.