Phoenix Contact · Power Distributor
1452709 is a Phoenix Contact circuit breaker with Rated current Ie 12 A; Breaking capacity Icu/Ics Supply voltage Green LED; Enclosure rating IP20 (IEC 60529). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ie12 A
-
Breaking capacity Icu/IcsSupply voltage Green LED
-
Enclosure ratingIP20 (IEC 60529)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Rated current Ie |
12 A |
| Breaking capacity Icu/Ics |
Supply voltage Green LED |
| Input voltage range |
85...264 V AC / 110...300 V DC (IEC 61010) |
| Efficiency |
up to 94 % |
| Rated torque |
0.4 Nm |
| I/O and communication |
| Flame detection |
DIN EN 50265 |
| Mechanical |
| Weight |
107.4 kg/km |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
19x 0.15 mm |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+70 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Power Distributor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Power Distributor variants |
| Catalog number |
Breaking capacity Icu/Ics |
|
1452709 (this page) |
Supply voltage Green LED |
| 1452725 |
Supply voltage Green LED |
| 1452783 |
— |
| 1452437 |
— |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1452709 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the 12 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1452709
Phoenix Contact 1452709 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1452709; verify the catalog number against your bill of materials before requesting a quotation.
- Rated current Ie: 12 A — Use it as the reference when cross-checking a current-production equivalent.
- Rated torque: 0.4 Nm — Verify it in the project documentation before confirming the order.
- Certifications: CE, UL, cULus — Check this value against the nameplate of the installed unit before ordering.
- Breaking capacity Icu/Ics: Supply voltage Green LED — Match it to the existing panel and upstream protection.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1452709
Q.Before ordering 1452709, which flame detection entry should be checked?
The flame detection entry quoted above is DIN EN 50265. Confirm this figure against the unit currently in the panel.
Q.Where can I find the enclosure rating data for 1452709?
It is listed in the specification table for Phoenix Contact 1452709 as IP20 (IEC 60529). Use the value as the reference when sourcing a current-production equivalent.
Q.For 1452709, what does the specification table state about terminal wire size?
The specification table lists terminal wire size = 19x 0.15 mm for Phoenix Contact 1452709. Check the revision of the installed unit if the catalog number has been superseded.
Q.Can the 1452709 replace the unit currently installed in my panel?
Compare catalog number 1452709 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 1452709 before ordering?
Match the catalog number 1452709 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.