Phoenix Contact · Heavy-Duty Connector
1415774 is a Phoenix Contact industrial component with Rated current Ie max. 2 A (USB); Rated operational voltage 140 V DC (USB); Enclosure rating IP20 (IEC 60529). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Iemax. 2 A (USB)
-
Rated operational voltage140 V DC (USB)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
Specifications
| Electrical |
| Rated current Ie |
max. 2 A (USB) |
| Rated operational voltage |
140 V DC (USB) |
| Rated torque |
1.5 ... 2 Nm |
| Mechanical |
| Weight |
22.22 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Cutout dimensions |
35 mm |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Heavy-Duty Connector specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Heavy-Duty Connector variants |
| Catalog number |
Rated current Ie |
Rated operational voltage |
Mounting |
|
1415774 (this page) |
max. 2 A (USB) |
140 V DC (USB) |
DIN rail / panel |
| 1415758 |
max. 1.5 A DC (RJ45) |
max. 125 V AC (AC outlet, UL, CSA rating) |
DIN rail / panel |
| 1460103 |
— |
— |
DIN rail / panel |
| 1602067 |
— |
— |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1415774 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 140 V DC (USB) — and switches or conditions the load within the max. 2 A (USB) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1415774
Phoenix Contact 1415774 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1415774; verify the catalog number against your bill of materials before requesting a quotation.
- Rated current Ie: max. 2 A (USB) — Record it with the other nameplate data when sourcing a replacement.
- Rated torque: 1.5 ... 2 Nm — Confirm the revision of the installed unit before a like-for-like replacement.
- Rated operational voltage: 140 V DC (USB) — Use it as the reference when cross-checking a current-production equivalent.
- Weight: 22.22 g — Verify it in the project documentation before confirming the order.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about 1415774
Q.Before ordering 1415774, which weight entry should be checked?
The weight entry quoted above is 22.22 g. Confirm this figure against the unit currently in the panel.
Q.Where can I find the mounting data for 1415774?
It is listed in the specification table for Phoenix Contact 1415774 as DIN rail / panel. Use the value as the reference when sourcing a current-production equivalent.
Q.For 1415774, what does the specification table state about cutout dimensions?
The specification table lists cutout dimensions = 35 mm for Phoenix Contact 1415774. Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for 1415774?
Send the full catalog number 1415774, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1415774.
Q.How do I confirm compatibility of 1415774 before ordering?
Match the catalog number 1415774 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.