Phoenix Contact · Heavy-Duty Connector
1415758 is a Phoenix Contact industrial component with Rated current Ie max. 1.5 A DC (RJ45); Rated operational voltage max. 125 V AC (AC outlet, UL, CSA rating); Enclosure rating IP20 (IEC 60529). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Iemax. 1.5 A DC (RJ45)
-
Rated operational voltagemax. 125 V AC (AC outlet, UL, CSA rating)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
Specifications
| Electrical |
| Rated current Ie |
max. 1.5 A DC (RJ45) |
| Rated operational voltage |
max. 125 V AC (AC outlet, UL, CSA rating) |
| Rated torque |
1.5 ... 2 Nm |
| Mechanical |
| Weight |
312.1 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Cutout dimensions |
35 mm |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Heavy-Duty Connector specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Heavy-Duty Connector variants |
| Catalog number |
Rated current Ie |
Rated operational voltage |
Mounting |
|
1415758 (this page) |
max. 1.5 A DC (RJ45) |
max. 125 V AC (AC outlet, UL, CSA rating) |
DIN rail / panel |
| 1415774 |
max. 2 A (USB) |
140 V DC (USB) |
DIN rail / panel |
| 1460103 |
— |
— |
DIN rail / panel |
| 1602067 |
— |
— |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1415758 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — max. 125 V AC (AC outlet, UL, CSA rating) — and switches or conditions the load within the max. 1.5 A DC (RJ45) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1415758
Phoenix Contact 1415758 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1415758; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Mounting: DIN rail / panel — Match it to the existing panel and upstream protection.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Record it with the other nameplate data when sourcing a replacement.
- Certifications: CE, UL, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
- Rated torque: 1.5 ... 2 Nm — Use it as the reference when cross-checking a current-production equivalent.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 1415758
Q.Before ordering 1415758, which certifications entry should be checked?
The certifications entry quoted above is CE, UL, cULus. Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the rated operational voltage data for 1415758?
It is listed in the specification table for Phoenix Contact 1415758 as max. 125 V AC (AC outlet, UL, CSA rating). Compare it with the nameplate of the installed unit before ordering.
Q.For 1415758, what does the specification table state about operating temperature?
The specification table lists operating temperature = 0...+55 °C (IEC 60068-2-1) for Phoenix Contact 1415758. Confirm this figure against the unit currently in the panel.
Q.Can the 1415758 replace the unit currently installed in my panel?
Compare catalog number 1415758 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 1415758?
Send the full catalog number 1415758, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1415758.