Phoenix Contact · Connection Cable
1340122 is a Phoenix Contact connection cable with Rated current Ie up to 4 A; Enclosure rating IP67 (IEC 60529); Operating temperature -25...+80 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 4 A
-
Enclosure ratingIP67 (IEC 60529)
-
Operating temperature-25...+80 °C (IEC 60068-2-1)
-
CertificationsCE, UL, cULus
Specifications
| Electrical |
| Rated current Ie |
up to 4 A |
| Frequency |
0.1 GHz ... 7.25 GHz |
| Rated torque |
0.7 ... 1.1 Nm |
| I/O and communication |
| Flame detection |
yes |
| Mechanical |
| Weight |
85.8 g |
| Terminal wire size |
23 Ω/km |
| Enclosure rating |
IP67 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
-25...+80 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Connection Cable specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Connection Cable variants |
| Catalog number |
Rated current Ie |
|
1340122 (this page) |
up to 4 A |
| 1340139 |
up to 4 A |
| 1340143 |
up to 4 A |
| 1000042 |
up to 4 A |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1340122 is the device-level element in a Phoenix Contact connection cable installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the up to 4 A ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides standard panel or DIN-rail support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1340122
Phoenix Contact 1340122 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1340122; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Terminal wire size: 23 Ω/km — Confirm the revision of the installed unit before a like-for-like replacement.
- Frequency: 0.1 GHz ... 7.25 GHz — Use it as the reference when cross-checking a current-production equivalent.
- Enclosure rating: IP67 (IEC 60529) — Verify it in the project documentation before confirming the order.
- Operating temperature: -25...+80 °C (IEC 60068-2-1) — Check this value against the nameplate of the installed unit before ordering.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1340122
Q.Before ordering 1340122, which terminal wire size entry should be checked?
The terminal wire size entry quoted above is 23 Ω/km. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the weight data for 1340122?
It is listed in the specification table for Phoenix Contact 1340122 as 85.8 g. Check the revision of the installed unit if the catalog number has been superseded.
Q.For 1340122, what does the specification table state about rated current Ie?
The specification table lists rated current Ie = up to 4 A for Phoenix Contact 1340122. Compare it with the nameplate of the installed unit before ordering.
Q.Can the 1340122 replace the unit currently installed in my panel?
Compare catalog number 1340122 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 1340122 before ordering?
Match the catalog number 1340122 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.