Phoenix Contact · Fiber Optic Distributor
1208052 is a Phoenix Contact industrial component with Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1); Mounting DIN rail / panel. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
MountingDIN rail / panel
-
CertificationsCE, UL, cULus
Specifications
| Mechanical |
| Weight |
571 g |
| Mounting |
DIN rail / panel |
| Terminal wire size |
12 |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Fiber Optic Distributor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Fiber Optic Distributor variants |
| Catalog number |
Mounting |
|
1208052 (this page) |
DIN rail / panel |
| 1208051 |
DIN rail / panel |
| 1208054 |
DIN rail / panel |
| 1208432 |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1208052 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — the rated supply — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1208052
Phoenix Contact 1208052 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1208052; verify the catalog number against your bill of materials before requesting a quotation.
- Certifications: CE, UL, cULus — Record it with the other nameplate data when sourcing a replacement.
- Enclosure rating: IP20 (IEC 60529) — Confirm the revision of the installed unit before a like-for-like replacement.
- Terminal wire size: 12 — Use it as the reference when cross-checking a current-production equivalent.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Verify it in the project documentation before confirming the order.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1208052
Q.Before ordering 1208052, which mounting entry should be checked?
The mounting entry quoted above is DIN rail / panel. Confirm this figure against the unit currently in the panel.
Q.Where can I find the terminal wire size data for 1208052?
It is listed in the specification table for Phoenix Contact 1208052 as 12. Use the value as the reference when sourcing a current-production equivalent.
Q.For 1208052, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = IP20 (IEC 60529) for Phoenix Contact 1208052. Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for 1208052?
Send the full catalog number 1208052, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1208052.
Q.How do I confirm compatibility of 1208052 before ordering?
Match the catalog number 1208052 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.