Phoenix Contact · Remote I/O Module
1182185 is a Phoenix Contact industrial component with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Operating temperature 0...+55 °C (IEC 60068-2-1). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Tripping characteristic |
8 mm |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Input voltage range |
-3 V DC ... 5 V DC |
| Output voltage |
5 V DC |
| Frequency |
max. 300 kHz |
| Encoder type |
Asymmetrical encoder |
| Mechanical |
| Weight |
38.44 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.25 mm² ... 1.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
5 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Remote I/O Module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Remote I/O Module variants |
| Catalog number |
Mounting |
|
1182185 (this page) |
35 mm DIN rail (IEC 60715) |
| 2688077 |
35 mm DIN rail (IEC 60715) |
| 2688093 |
35 mm DIN rail (IEC 60715) |
| 2688297 |
35 mm DIN rail (IEC 60715) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1182185 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1182185
Phoenix Contact 1182185 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1182185; record the nameplate data of the unit being replaced before selecting an equivalent.
- Weight: 38.44 g — Check this value against the nameplate of the installed unit before ordering.
- Mounting: 35 mm DIN rail (IEC 60715) — Match it to the existing panel and upstream protection.
- Supply voltage: 24 V DC (IEC 61131-2) — Record it with the other nameplate data when sourcing a replacement.
- Terminal wire size: 0.25 mm² ... 1.5 mm² — Confirm the revision of the installed unit before a like-for-like replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1182185
Q.Which value is published under operating temperature for catalog number 1182185?
For 1182185, operating temperature is given as 0...+55 °C (IEC 60068-2-1). Confirm this figure against the unit currently in the panel.
Q.Before ordering 1182185, which weight entry should be checked?
The weight entry quoted above is 38.44 g. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the input voltage range data for 1182185?
It is listed in the specification table for Phoenix Contact 1182185 as -3 V DC ... 5 V DC. Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for 1182185?
Send the full catalog number 1182185, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1182185.
Q.Can the 1182185 replace the unit currently installed in my panel?
Compare catalog number 1182185 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.