Phoenix Contact · I/O component
2688297 – AXL F PWR 1H · I/O component
The Phoenix Contact 2688297 (AXL F PWR 1H) is an I/O component in the Phoenix Contact range. The specification below is transcribed from the official Phoenix Contact product page for this order number, which publishes the technical data in 10 sections: Dimensions, Notes, Mounting, Material specifications, Interfaces, Product properties and further sections.
Nominal voltage24 V DC
Degree of protectionIP20
Ambient temperature-25 °C ... 60 °C
Dimensions35 mm
ConnectionBus base module
Materialgray (RAL 7042)
How it works
Phoenix Contact keeps the values in the groups shown below, in the order the manufacturer publishes them: Dimensions, Notes, Mounting, Material specifications, Interfaces, Product properties, Electrical properties, Connection data, Environmental and real-life conditions, Standards and regulations. The values are carried over unchanged from the official product page; nothing is added beyond what the manufacturer states for this order number.
Specifications
Dimensions
Width35 mm
Height126.1 mm
Depth54 mm
Note on dimensionsThe depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).
Notes
Note on applicationOnly for industrial use
Note on applicationAs things stand now, we are preparing the product so that, as of December 11, 2027, it will comply with the requirements of the EU Cyber Resilience Act (CRA) based on the information currently available regarding the CRA.
Utilization restriction
EMC noteEMC: class A product, see manufacturer's declaration in the download area
Mounting
Mounting typeDIN rail mounting
Mounting positionany (no temperature derating)
Material specifications
Color (Housing)gray (RAL 7042)
Interfaces
Axioline F local bus
Number of interfaces2
Connection methodBus base module
Transmission speed100 Mbps
Product properties
Product typeI/O component
Product familyAxioline F
Typeblock modular
Mounting positionany (no temperature derating)
Scope of supplyincluding bus base module and Axioline F connector
Special propertiesThe product is being prepared for compliance with the Cyber Resilience Act (CRA)
Valuemax. 4 A
Insulation characteristics
Overvoltage categoryII (IEC 60664-1, EN 60664-1)
Pollution degree2 (IEC 60664-1, EN 60664-1)
Electrical properties
Maximum power dissipation for nominal condition2 W
Potentials: Communications power U L feed-in (the supply of the Axioline F local bus U Bus is generated from U L )
Supply voltage24 V DC
Supply voltage range19.2 V DC ... 30 V DC (including all tolerances, including ripple)
Current drawmax. 1.2 A (I Bus = 4 A; U L = 19,2 V)
Current consumption0 A
Protective circuitSurge protection; electronic (35 V, 0.5 s)
ValueReverse polarity protection; parallel diode; with external 5 A fuse (only for commissioning)
Potentials: Axioline F local bus supply (U Bus )
Supply voltage5 V DC (via bus base module)
Power supply unitmax. 4 A
Connection data
Connection technology
Connection nameAxioline F connector
Note on the connection methodPlease observe the information provided on conductor cross-sections in the “Axioline F: system and installation” user manual.
Axioline F connector
Connection methodPush-in connection
Note on the connection methodPlease observe the information provided on conductor cross-sections in the “Axioline F: system and installation” user manual.
Conductor cross-section, rigid0.2 mm² ... 1.5 mm²
Conductor cross-section, flexible0.2 mm² ... 1.5 mm²
Conductor cross-section AWG24 ... 16
Stripping length8 mm
Environmental and real-life conditions
Ambient conditions
Ambient temperature (operation)-25 °C ... 60 °C
Degree of protectionIP20
Air pressure (operation)70 kPa ... 106 kPa (up to 3000 m above sea level)
Air pressure (storage/transport)70 kPa ... 106 kPa (up to 3000 m above sea level)
Ambient temperature (storage/transport)-40 °C ... 85 °C
Permissible humidity (operation)5 % ... 95 % (non-condensing)
Permissible humidity (storage/transport)5 % ... 95 % (non-condensing)
Mechanical test
Vibration resistance in accordance with EN 60068-2-6/IEC 60068-2-65g
Shock in accordance with EN 60068-2-27/IEC 60068-2-2730g
Continuous shock in accordance with EN 60068-2-27/IEC 60068-2-2710g
Standards and regulations
Protection classIII (IEC 61140, EN 61140, VDE 0140-1)
Order number
2688297 — https://www.phoenixcontact.com/en-us/products/io-component-axl-f-pwr-1h-2688297
Official source
Phoenix Contact official product page, technical data section (EN-US); order number 2688297.
FAQ
What voltage does the 2688297 operate at?
Phoenix Contact gives a nominal voltage of 24 V DC for this order number.
What degree of protection does the 2688297 have?
It is rated IP20, as stated in the official technical data.
What ambient temperature is permitted?
Phoenix Contact specifies an ambient temperature of -25 °C ... 60 °C.
What are the dimensions?
The technical data gives 35 mm.
How is the 2688297 connected?
Phoenix Contact specifies the connection as Bus base module.
What material is the housing made of?
The technical data lists gray (RAL 7042).
Shipping & support. Stock is held in Shanghai and dispatched worldwide with the manufacturer's documentation. Contact us for the current lead time, price and freight before ordering.