Phoenix Contact · Network Switch
1031673 is a Phoenix Contact circuit breaker with Tripping characteristic 9 mm; Breaking capacity Icu/Ics Copper; Supply voltage 24 V DC (IEC 61131-2). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Tripping characteristic9 mm
-
Breaking capacity Icu/IcsCopper
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
Specifications
| Electrical |
| Breaking capacity Icu/Ics |
Copper |
| Tripping characteristic |
9 mm |
| Coil voltage |
typ. 24 V DC |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Rated speed |
10/100/1000 Mbps |
| Mechanical |
| Weight |
572.4 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.25 mm² ... 1.5 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
10 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Network Switch specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Network Switch variants |
| Catalog number |
Tripping characteristic |
Breaking capacity Icu/Ics |
|
1031673 (this page) |
9 mm |
Copper |
| 1026922 |
7 mm |
Ethernet in RJ45 twisted pair |
| 1026929 |
7 mm |
Ethernet RJ45 |
| 1026932 |
7 mm |
Ethernet RJ45 |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1031673 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1031673
Phoenix Contact 1031673 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1031673; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Weight: 572.4 g — Record it with the other nameplate data when sourcing a replacement.
- Tripping characteristic: 9 mm — Confirm the revision of the installed unit before a like-for-like replacement.
- Enclosure rating: IP20 (IEC 60529) — Use it as the reference when cross-checking a current-production equivalent.
- Certifications: CE, UL, cULus — Verify it in the project documentation before confirming the order.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 1031673
Q.Which value is published under weight for catalog number 1031673?
For 1031673, weight is given as 572.4 g. Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering 1031673, which tripping characteristic entry should be checked?
The tripping characteristic entry quoted above is 9 mm. Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the enclosure rating data for 1031673?
It is listed in the specification table for Phoenix Contact 1031673 as IP20 (IEC 60529). Confirm this figure against the unit currently in the panel.
Q.Can the 1031673 replace the unit currently installed in my panel?
Compare catalog number 1031673 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for 1031673?
Send the full catalog number 1031673, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 1031673.