Phoenix Contact 1026929 Network Switch

SKU: 1026929
Regular price $3,300.00
In stock (71 units)
Condition
Free standard shipping on orders of $500 and above
100% secure payments
Industry leading quality

Phoenix Contact · Network Switch

1026929 is a Phoenix Contact circuit breaker with Tripping characteristic 7 mm; Breaking capacity Icu/Ics Ethernet RJ45; Supply voltage 24 V DC (IEC 61131-2). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.

  • Tripping characteristic7 mm
  • Breaking capacity Icu/IcsEthernet RJ45
  • Supply voltage24 V DC (IEC 61131-2)
  • Enclosure ratingIP20 (IEC 60529)

Specifications

Electrical
Breaking capacity Icu/Ics Ethernet RJ45
Tripping characteristic 7 mm
Coil voltage 48 V DC
Supply voltage 24 V DC (IEC 61131-2)
Rated speed 10/100 Mbps (full duplex)
Mechanical
Weight 1,469 g
Mounting 35 mm DIN rail (IEC 60715)
Terminal wire size 0.2 mm² ... 2.5 mm²
Enclosure rating IP20 (IEC 60529)
Environment and compliance
Operating temperature 0...+55 °C (IEC 60068-2-1)
Certifications CE, UL, cULus
Humidity 5 % ... 95 % (non-condensing)

Values follow the Phoenix Contact Network Switch specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Phoenix Contact Network Switch variants
Catalog number Breaking capacity Icu/Ics Tripping characteristic
1026929 (this page) Ethernet RJ45 7 mm
1026922 Ethernet in RJ45 twisted pair 7 mm
1026932 Ethernet RJ45 7 mm
1026937 Ethernet RJ45 7 mm

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The 1026929 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Phoenix Contact 1026929

Phoenix Contact 1026929 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1026929; record the nameplate data of the unit being replaced before selecting an equivalent.

  • Enclosure rating: IP20 (IEC 60529) — Confirm the revision of the installed unit before a like-for-like replacement.
  • Rated speed: 10/100 Mbps (full duplex) — Use it as the reference when cross-checking a current-production equivalent.
  • Supply voltage: 24 V DC (IEC 61131-2) — Verify it in the project documentation before confirming the order.
  • Tripping characteristic: 7 mm — Check this value against the nameplate of the installed unit before ordering.

Available from stock with datasheet, certificates and a quotation on request.

Common questions about 1026929

Q.Where can I find the coil voltage data for 1026929?

It is listed in the specification table for Phoenix Contact 1026929 as 48 V DC. Check the revision of the installed unit if the catalog number has been superseded.

Q.For 1026929, what does the specification table state about supply voltage?

The specification table lists supply voltage = 24 V DC (IEC 61131-2) for Phoenix Contact 1026929. Compare it with the nameplate of the installed unit before ordering.

Q.Which value is published under operating temperature for catalog number 1026929?

For 1026929, operating temperature is given as 0...+55 °C (IEC 60068-2-1). Confirm this figure against the unit currently in the panel.

Q.How do I confirm compatibility of 1026929 before ordering?

Match the catalog number 1026929 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.

Q.Can the 1026929 replace the unit currently installed in my panel?

Compare catalog number 1026929 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.

Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.

Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. Express shipping is a fixed USD 50.00 for eligible destinations in the United States and Canada.

Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.

Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date the order is placed (order date), against defects in materials and workmanship under normal use.

This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.

★★★★★

No reviews yet. Be the first to review this product!