Phoenix Contact · Network Switch Module
1025401 is a Phoenix Contact circuit breaker with Breaking capacity Icu/Ics Single-mode fiberglass; Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Breaking capacity Icu/IcsSingle-mode fiberglass
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Breaking capacity Icu/Ics |
Single-mode fiberglass |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Rated speed |
1 Gbps |
| Mechanical |
| Weight |
30 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
5 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Network Switch Module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Network Switch Module variants |
| Catalog number |
Breaking capacity Icu/Ics |
|
1025401 (this page) |
Single-mode fiberglass |
| 2831028 |
UL Supply voltage Green LED |
| 2832344 |
Ethernet in RJ45 twisted pair |
| 2832357 |
Ethernet in RJ45 twisted pair |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 1025401 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 1025401
Phoenix Contact 1025401 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 1025401; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Supply voltage: 24 V DC (IEC 61131-2) — Confirm the revision of the installed unit before a like-for-like replacement.
- Rated speed: 1 Gbps — Use it as the reference when cross-checking a current-production equivalent.
- Certifications: CE, UL, cULus — Verify it in the project documentation before confirming the order.
- Weight: 30 g — Check this value against the nameplate of the installed unit before ordering.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 1025401
Q.Where can I find the weight data for 1025401?
It is listed in the specification table for Phoenix Contact 1025401 as 30 g. Use the value as the reference when sourcing a current-production equivalent.
Q.For 1025401, what does the specification table state about humidity?
The specification table lists humidity = 5 % ... 95 % (non-condensing) for Phoenix Contact 1025401. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under mounting for catalog number 1025401?
For 1025401, mounting is given as 35 mm DIN rail (IEC 60715). Compare it with the nameplate of the installed unit before ordering.
Q.How do I confirm compatibility of 1025401 before ordering?
Match the catalog number 1025401 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the 1025401 replace the unit currently installed in my panel?
Compare catalog number 1025401 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.