Phoenix Contact · Network Switch Module
2831028 is a Phoenix Contact circuit breaker with Breaking capacity Icu/Ics UL Supply voltage Green LED; Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Breaking capacity Icu/IcsUL Supply voltage Green LED
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Breaking capacity Icu/Ics |
UL Supply voltage Green LED |
| Coil voltage |
24 V DC (typical) |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Power consumption |
typ. 4.6 W |
| Rated speed |
10 Mbps (half duplex) |
| Mechanical |
| Weight |
347 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
30 % ... 95 % (non-condensing) |
Values follow the Phoenix Contact Network Switch Module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Network Switch Module variants |
| Catalog number |
Breaking capacity Icu/Ics |
|
2831028 (this page) |
UL Supply voltage Green LED |
| 2832344 |
Ethernet in RJ45 twisted pair |
| 2832357 |
Ethernet in RJ45 twisted pair |
| 2832425 |
LEDs at head station / extension module |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 2831028 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 2831028
Phoenix Contact 2831028 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 2831028; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Mounting: 35 mm DIN rail (IEC 60715) — Verify it in the project documentation before confirming the order.
- Power consumption: typ. 4.6 W — Check this value against the nameplate of the installed unit before ordering.
- Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
- Humidity: 30 % ... 95 % (non-condensing) — Record it with the other nameplate data when sourcing a replacement.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 2831028
Q.Before ordering 2831028, which mounting entry should be checked?
The mounting entry quoted above is 35 mm DIN rail (IEC 60715). Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the supply voltage data for 2831028?
It is listed in the specification table for Phoenix Contact 2831028 as 24 V DC (IEC 61131-2). Check the revision of the installed unit if the catalog number has been superseded.
Q.For 2831028, what does the specification table state about operating temperature?
The specification table lists operating temperature = 0...+55 °C (IEC 60068-2-1) for Phoenix Contact 2831028. Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for 2831028?
Send the full catalog number 2831028, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 2831028.
Q.Can the 2831028 replace the unit currently installed in my panel?
Compare catalog number 2831028 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.