Phoenix Contact · Terminal Block
0444019 is a Phoenix Contact terminal block with Rated current Ie up to 41 A (IEC 60947-7-1); Rated operational voltage 800 V (IEC 60947-7-1); Operating temperature -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Operating temperature-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Tripping characteristic |
15 mm |
| Frequency |
f1= 5 Hz to f2= 250 Hz |
| Rated torque |
3.2 ... 3.7 Nm |
| Mechanical |
| Weight |
89.52 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
0.75 mm² ... 50 mm² |
| Environment and compliance |
| Operating temperature |
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C) |
| Certifications |
CE, UL, cULus |
| Humidity |
20 % ... 90 % |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Terminal Block variants |
| Catalog number |
Mounting |
Rated current Ie |
Rated operational voltage |
|
0444019 (this page) |
35 mm DIN rail (IEC 60715) |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
| 0444048 |
DIN rail / panel |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
| 0441012 |
DIN rail / panel |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
| 0441041 |
35 mm DIN rail (IEC 60715) |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 0444019 is the device-level element in a Phoenix Contact terminal block installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 0444019
Phoenix Contact 0444019 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 0444019; verify the catalog number against your bill of materials before requesting a quotation.
- Mounting: 35 mm DIN rail (IEC 60715) — Confirm the revision of the installed unit before a like-for-like replacement.
- Rated operational voltage: 800 V (IEC 60947-7-1) — Use it as the reference when cross-checking a current-production equivalent.
- Operating temperature: -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C) — Verify it in the project documentation before confirming the order.
- Tripping characteristic: 15 mm — Check this value against the nameplate of the installed unit before ordering.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about 0444019
Q.Where can I find the tripping characteristic data for 0444019?
It is listed in the specification table for Phoenix Contact 0444019 as 15 mm. Use the value as the reference when sourcing a current-production equivalent.
Q.For 0444019, what does the specification table state about humidity?
The specification table lists humidity = 20 % ... 90 % for Phoenix Contact 0444019. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under rated current Ie for catalog number 0444019?
For 0444019, rated current Ie is given as up to 41 A (IEC 60947-7-1). Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for 0444019?
Send the full catalog number 0444019, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 0444019.
Q.Can the 0444019 replace the unit currently installed in my panel?
Compare catalog number 0444019 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.