Phoenix Contact · Terminal Block
0441041 is a Phoenix Contact terminal block with Rated current Ie up to 41 A (IEC 60947-7-1); Rated operational voltage 800 V (IEC 60947-7-1); Operating temperature -60 °C ... 110 °C. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Operating temperature-60 °C ... 110 °C
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Tripping characteristic |
30 mm |
| Rated torque |
15 ... 20 Nm |
| Mechanical |
| Weight |
327.4 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
25 mm² ... 95 mm² |
| Environment and compliance |
| Operating temperature |
-60 °C ... 110 °C |
| Certifications |
CE, UL, cULus |
| Humidity |
20 % ... 90 % |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Terminal Block variants |
| Catalog number |
Mounting |
Rated current Ie |
Rated operational voltage |
|
0441041 (this page) |
35 mm DIN rail (IEC 60715) |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
| 0441012 |
DIN rail / panel |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
| 0441083 |
DIN rail / panel |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
| 0441119 |
DIN rail / panel |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 0441041 is the device-level element in a Phoenix Contact terminal block installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 0441041
Phoenix Contact 0441041 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 0441041; verify the catalog number against your bill of materials before requesting a quotation.
- Operating temperature: -60 °C ... 110 °C — Record it with the other nameplate data when sourcing a replacement.
- Humidity: 20 % ... 90 % — Confirm the revision of the installed unit before a like-for-like replacement.
- Rated current Ie: up to 41 A (IEC 60947-7-1) — Use it as the reference when cross-checking a current-production equivalent.
- Weight: 327.4 g — Verify it in the project documentation before confirming the order.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 0441041
Q.Before ordering 0441041, which mounting entry should be checked?
The mounting entry quoted above is 35 mm DIN rail (IEC 60715). Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the terminal wire size data for 0441041?
It is listed in the specification table for Phoenix Contact 0441041 as 25 mm² ... 95 mm². Check the revision of the installed unit if the catalog number has been superseded.
Q.For 0441041, what does the specification table state about certifications?
The specification table lists certifications = CE, UL, cULus for Phoenix Contact 0441041. Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for 0441041?
Send the full catalog number 0441041, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 0441041.
Q.How do I confirm compatibility of 0441041 before ordering?
Match the catalog number 0441041 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.