Phoenix Contact · Terminal Block
0443052 is a Phoenix Contact terminal block with Rated current Ie up to 41 A (IEC 60947-7-1); Rated operational voltage 800 V (IEC 60947-7-1); Enclosure rating IP20 (IEC 60529). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Tripping characteristic |
11 mm |
| Rated torque |
1.5 ... 1.8 Nm |
| Mechanical |
| Weight |
36.888 g |
| Mounting |
DIN rail / panel |
| Terminal wire size |
2.5 mm² ... 25 mm² |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
20 % ... 90 % |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Terminal Block variants |
| Catalog number |
Mounting |
Rated current Ie |
Rated operational voltage |
|
0443052 (this page) |
DIN rail / panel |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
| 0443023 |
DIN rail / panel |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
| 0443049 |
35 mm DIN rail (IEC 60715) |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
| 0441012 |
DIN rail / panel |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 0443052 is the device-level element in a Phoenix Contact terminal block installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 0443052
Phoenix Contact 0443052 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 0443052; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Rated current Ie: up to 41 A (IEC 60947-7-1) — Confirm the revision of the installed unit before a like-for-like replacement.
- Weight: 36.888 g — Use it as the reference when cross-checking a current-production equivalent.
- Humidity: 20 % ... 90 % — Verify it in the project documentation before confirming the order.
- Mounting: DIN rail / panel — Check this value against the nameplate of the installed unit before ordering.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 0443052
Q.Where can I find the mounting data for 0443052?
It is listed in the specification table for Phoenix Contact 0443052 as DIN rail / panel. Check the revision of the installed unit if the catalog number has been superseded.
Q.For 0443052, what does the specification table state about terminal wire size?
The specification table lists terminal wire size = 2.5 mm² ... 25 mm² for Phoenix Contact 0443052. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under rated torque for catalog number 0443052?
For 0443052, rated torque is given as 1.5 ... 1.8 Nm. Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for 0443052?
Send the full catalog number 0443052, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 0443052.
Q.Can the 0443052 replace the unit currently installed in my panel?
Compare catalog number 0443052 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.