Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Phoenix Contact · Terminal Block
0441504 is a Phoenix Contact terminal block with Rated current Ie up to 41 A (IEC 60947-7-1); Rated operational voltage 800 V (IEC 60947-7-1); Operating temperature -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Rated current Ie | up to 41 A (IEC 60947-7-1) |
|---|---|
| Rated operational voltage | 800 V (IEC 60947-7-1) |
| Tripping characteristic | 8 mm |
| Frequency | f1= 5 Hz to f2= 250 Hz |
| Rated torque | 0.6 ... 0.8 Nm |
| Mechanical | |
| Weight | 20.75 g |
| Mounting | 35 mm DIN rail (IEC 60715) |
| Terminal wire size | 0.2 mm² ... 6 mm² |
| Environment and compliance | |
| Operating temperature | -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C) |
| Certifications | CE, UL, cULus |
| Humidity | 20 % ... 90 % |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Phoenix Contact Terminal Block variants | |||
| Catalog number | Mounting | Rated current Ie | Rated operational voltage |
|---|---|---|---|
| 0441504 (this page) | 35 mm DIN rail (IEC 60715) | up to 41 A (IEC 60947-7-1) | 800 V (IEC 60947-7-1) |
| 0441012 | DIN rail / panel | up to 41 A (IEC 60947-7-1) | 800 V (IEC 60947-7-1) |
| 0441041 | 35 mm DIN rail (IEC 60715) | up to 41 A (IEC 60947-7-1) | 800 V (IEC 60947-7-1) |
| 0441083 | DIN rail / panel | up to 41 A (IEC 60947-7-1) | 800 V (IEC 60947-7-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The 0441504 is the device-level element in a Phoenix Contact terminal block installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Phoenix Contact 0441504 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 0441504; record the nameplate data of the unit being replaced before selecting an equivalent.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Q.For 0441504, what does the specification table state about rated torque?
The specification table lists rated torque = 0.6 ... 0.8 Nm for Phoenix Contact 0441504. Confirm this figure against the unit currently in the panel.
Q.Which value is published under certifications for catalog number 0441504?
For 0441504, certifications is given as CE, UL, cULus. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering 0441504, which mounting entry should be checked?
The mounting entry quoted above is 35 mm DIN rail (IEC 60715). Check the revision of the installed unit if the catalog number has been superseded.
Q.Can the 0441504 replace the unit currently installed in my panel?
Compare catalog number 0441504 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of 0441504 before ordering?
Match the catalog number 0441504 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
