Phoenix Contact · Terminal Block
0424026 is a Phoenix Contact circuit breaker with Rated current Ie up to 41 A (IEC 60947-7-1); Tripping characteristic 16 mm; Rated operational voltage 800 V (IEC 60947-7-1). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Tripping characteristic16 mm
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Tripping characteristic |
16 mm |
| Rated torque |
3.2 ... 3.7 Nm |
| I/O and communication |
| Bus interface |
140 A |
| Mechanical |
| Weight |
20 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Terminal wire size |
2.5 mm² ... 35 mm² |
| Environment and compliance |
| Operating temperature |
-25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C) |
| Certifications |
CE, UL, cULus |
| Humidity |
20 % ... 90 % |
Values follow the Phoenix Contact Terminal Block specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Terminal Block variants |
| Catalog number |
Tripping characteristic |
Rated operational voltage |
|
0424026 (this page) |
16 mm |
800 V (IEC 60947-7-1) |
| 0424013 |
16 mm |
800 V (IEC 60947-7-1) |
| 0404017 |
16 mm |
800 V (IEC 60947-7-1) |
| 0404046 |
16 mm |
800 V (IEC 60947-7-1) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 0424026 is the device-level element in a Phoenix Contact circuit breaker installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 0424026
Phoenix Contact 0424026 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 0424026; verify the catalog number against your bill of materials before requesting a quotation.
- Tripping characteristic: 16 mm — Check this value against the nameplate of the installed unit before ordering.
- Certifications: CE, UL, cULus — Match it to the existing panel and upstream protection.
- Mounting: 35 mm DIN rail (IEC 60715) — Record it with the other nameplate data when sourcing a replacement.
- Rated operational voltage: 800 V (IEC 60947-7-1) — Confirm the revision of the installed unit before a like-for-like replacement.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 0424026
Q.For 0424026, what does the specification table state about tripping characteristic?
The specification table lists tripping characteristic = 16 mm for Phoenix Contact 0424026. Compare it with the nameplate of the installed unit before ordering.
Q.Which value is published under rated current Ie for catalog number 0424026?
For 0424026, rated current Ie is given as up to 41 A (IEC 60947-7-1). Confirm this figure against the unit currently in the panel.
Q.Before ordering 0424026, which rated torque entry should be checked?
The rated torque entry quoted above is 3.2 ... 3.7 Nm. Use the value as the reference when sourcing a current-production equivalent.
Q.What should I include in an enquiry for 0424026?
Send the full catalog number 0424026, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 0424026.
Q.How do I confirm compatibility of 0424026 before ordering?
Match the catalog number 0424026 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.