Phoenix Contact · Terminal Block Jumper
0202170 is a Phoenix Contact industrial component with Rated current Ie up to 41 A (IEC 60947-7-1); Rated operational voltage 800 V (IEC 60947-7-1); Enclosure rating IP20 (IEC 60529). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Mechanical |
| Weight |
25.3 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Phoenix Contact Terminal Block Jumper specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Terminal Block Jumper variants |
| Catalog number |
Rated current Ie |
Rated operational voltage |
Mounting |
|
0202170 (this page) |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
DIN rail / panel |
| 0202316 |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
DIN rail / panel |
| 0201139 |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
DIN rail / panel |
| 0201142 |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 0202170 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 0202170
Phoenix Contact 0202170 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 0202170; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Enclosure rating: IP20 (IEC 60529) — Confirm the revision of the installed unit before a like-for-like replacement.
- Operating temperature: 0...+55 °C (IEC 60068-2-1) — Use it as the reference when cross-checking a current-production equivalent.
- Rated operational voltage: 800 V (IEC 60947-7-1) — Verify it in the project documentation before confirming the order.
- Certifications: CE, UL, cULus — Check this value against the nameplate of the installed unit before ordering.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about 0202170
Q.Where can I find the mounting data for 0202170?
It is listed in the specification table for Phoenix Contact 0202170 as DIN rail / panel. Confirm this figure against the unit currently in the panel.
Q.For 0202170, what does the specification table state about operating temperature?
The specification table lists operating temperature = 0...+55 °C (IEC 60068-2-1) for Phoenix Contact 0202170. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under rated operational voltage for catalog number 0202170?
For 0202170, rated operational voltage is given as 800 V (IEC 60947-7-1). Check the revision of the installed unit if the catalog number has been superseded.
Q.What should I include in an enquiry for 0202170?
Send the full catalog number 0202170, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 0202170.
Q.Can the 0202170 replace the unit currently installed in my panel?
Compare catalog number 0202170 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.