Phoenix Contact · Terminal Block Jumper
0201414 is a Phoenix Contact industrial component with Rated current Ie up to 41 A (IEC 60947-7-1); Rated operational voltage 800 V (IEC 60947-7-1); Enclosure rating IP20 (IEC 60529). It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Rated current Ieup to 41 A (IEC 60947-7-1)
-
Rated operational voltage800 V (IEC 60947-7-1)
-
Enclosure ratingIP20 (IEC 60529)
-
Operating temperature0...+55 °C (IEC 60068-2-1)
Specifications
| Electrical |
| Rated current Ie |
up to 41 A (IEC 60947-7-1) |
| Rated operational voltage |
800 V (IEC 60947-7-1) |
| Mechanical |
| Weight |
237.56 g |
| Mounting |
DIN rail / panel |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
| Humidity |
30 % ... 70 % |
Values follow the Phoenix Contact Terminal Block Jumper specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Phoenix Contact Terminal Block Jumper variants |
| Catalog number |
Rated current Ie |
Rated operational voltage |
Mounting |
|
0201414 (this page) |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
DIN rail / panel |
| 0201139 |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
DIN rail / panel |
| 0201142 |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
DIN rail / panel |
| 0201375 |
up to 41 A (IEC 60947-7-1) |
800 V (IEC 60947-7-1) |
DIN rail / panel |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The 0201414 is the device-level element in a Phoenix Contact industrial component installation. It receives the field signals and control supply listed above — 800 V (IEC 60947-7-1) — and switches or conditions the load within the up to 41 A (IEC 60947-7-1) ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides DIN rail / panel support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Phoenix Contact 0201414
Phoenix Contact 0201414 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number 0201414; record the nameplate data of the unit being replaced before selecting an equivalent.
- Humidity: 30 % ... 70 % — Record it with the other nameplate data when sourcing a replacement.
- Mounting: DIN rail / panel — Confirm the revision of the installed unit before a like-for-like replacement.
- Certifications: CE, UL, cULus — Use it as the reference when cross-checking a current-production equivalent.
- Enclosure rating: IP20 (IEC 60529) — Verify it in the project documentation before confirming the order.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about 0201414
Q.Before ordering 0201414, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is IP20 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the operating temperature data for 0201414?
It is listed in the specification table for Phoenix Contact 0201414 as 0...+55 °C (IEC 60068-2-1). Compare it with the nameplate of the installed unit before ordering.
Q.For 0201414, what does the specification table state about mounting?
The specification table lists mounting = DIN rail / panel for Phoenix Contact 0201414. Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for 0201414?
Send the full catalog number 0201414, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Phoenix Contact 0201414.
Q.How do I confirm compatibility of 0201414 before ordering?
Match the catalog number 0201414 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.