Omron · CP-series compact PLC / extension
CP1L-EL20DT1-D is an Omron PLC module with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Communication ports EtherNet/IP, EtherCAT. It is used in packaging machines, conveyor transfer cells, small process skids where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| Frequency |
For ON duty +1%, "0%:10 kHz output |
| Mechanical |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Backlight life |
Normal: Lit green; Error: Flashing red |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Certifications |
CE, UL, cULus |
Values follow the Omron CP-series compact PLC / extension specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Omron CP-series compact PLC / extension variants |
| Catalog number |
Output stage |
Supply voltage |
|
CP1L-EL20DT1-D (this page) |
— |
24 V DC (IEC 61131-2) |
| CP1L-EL20DT-D |
Transistor sinking |
24 V DC (IEC 61131-2) |
| CP1L-EL20DR-D |
Relay |
24 V DC (IEC 61131-2) |
| CP1L-EM30DR-D |
Relay |
24 V DC (IEC 61131-2) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The CP1L-EL20DT1-D is the device-level element in an Omron PLC module installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in packaging machines, conveyor transfer cells, small process skids, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Omron CP1L-EL20DT1-D
Omron CP1L-EL20DT1-D — PLC / CPU module used as the device-level control core in an automation panel, handling logic, timing and communication tasks. The figures below are taken from the specification table on this page for catalog number CP1L-EL20DT1-D; verify the catalog number against your bill of materials before requesting a quotation.
- Frequency: For ON duty +1%, "0%:10 kHz output — Match it to the existing panel and upstream protection.
- Enclosure rating: IP20 (IEC 60529) — Record it with the other nameplate data when sourcing a replacement.
- Certifications: CE, UL, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
- Mounting: 35 mm DIN rail (IEC 60715) — Use it as the reference when cross-checking a current-production equivalent.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about CP1L-EL20DT1-D
Q.Where can I find the frequency data for CP1L-EL20DT1-D?
It is listed in the specification table for Omron CP1L-EL20DT1-D as For ON duty +1%, "0%:10 kHz output. Compare it with the nameplate of the installed unit before ordering.
Q.For CP1L-EL20DT1-D, what does the specification table state about operating temperature?
The specification table lists operating temperature = 0...+55 °C (IEC 60068-2-1) for Omron CP1L-EL20DT1-D. Confirm this figure against the unit currently in the panel.
Q.Which value is published under certifications for catalog number CP1L-EL20DT1-D?
For CP1L-EL20DT1-D, certifications is given as CE, UL, cULus. Use the value as the reference when sourcing a current-production equivalent.
Q.Can the CP1L-EL20DT1-D replace the unit currently installed in my panel?
Compare catalog number CP1L-EL20DT1-D and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for CP1L-EL20DT1-D?
Send the full catalog number CP1L-EL20DT1-D, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Omron CP1L-EL20DT1-D.