Omron CP1L-EL20DT-D PLC Module

Omron · CP-series compact PLC / extension

CP1L-EL20DT-D is an Omron PLC module with Output stage Transistor sinking; Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529). It is used in packaging machines, conveyor transfer cells, small process skids where the installed unit is matched to the original catalog number and a compact, documented part is required.

• Output stageTransistor sinking
• Supply voltage24 V DC (IEC 61131-2)
• Enclosure ratingIP20 (IEC 60529)

Specifications

Values follow the Omron CP-series compact PLC / extension specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.

Model comparison in the same family

Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.

Where it sits in the control system

The CP1L-EL20DT-D is the device-level element in an Omron PLC module installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.

Typical installations place it in packaging machines, conveyor transfer cells, small process skids, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.

Selection notes for Omron CP1L-EL20DT-D

Omron CP1L-EL20DT-D — PLC / CPU module used as the device-level control core in an automation panel, handling logic, timing and communication tasks. The figures below are taken from the specification table on this page for catalog number CP1L-EL20DT-D; always cross-check the catalog number and hardware revision on the nameplate before placing an order.

• Mounting: 35 mm DIN rail (IEC 60715) — Confirm the revision of the installed unit before a like-for-like replacement.
• Operating temperature: 0...+55 °C (IEC 60068-2-1) — Use it as the reference when cross-checking a current-production equivalent.
• Certifications: CE, UL, cULus — Verify it in the project documentation before confirming the order.
• Supply voltage: 24 V DC (IEC 61131-2) — Check this value against the nameplate of the installed unit before ordering.

For a discontinued unit, match function and electrical ratings rather than the label alone.

Common questions about CP1L-EL20DT-D