Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Mitsubishi · PLC Controller (FX / Q / L / A Series)
FX3G14MRES is a Mitsubishi PLC controller with Output stage Relay; Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529). It is used in packaging machines, conveyor transfer cells, small process skids where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Supply voltage | 24 V DC (IEC 61131-2) |
|---|---|
| Power consumption | 31 W |
| Rated speed | 0.21 us/contact (standard) |
| I/O and communication | |
| Input type | 24 VDC sink/source |
| Output stage | Relay |
| Mechanical | |
| Dimensions (H x W x D) | 90 x 90 x 86 mm |
| Weight | 0.5 kg |
| Mounting | 35 mm DIN rail (IEC 60715) |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | 0...+55 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
Values follow the Mitsubishi PLC Controller (FX / Q / L / A Series) specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Mitsubishi PLC Controller (FX / Q / L / A Series) variants | |||
| Catalog number | Output stage | Supply voltage | |
|---|---|---|---|
| FX3G14MRES (this page) | Relay | 24 V DC (IEC 61131-2) | |
| FX3G14MRDS | Relay | 24 V DC (IEC 61131-2) | |
| FX3G14MTESS | Transistor (source) | 24 V DC (IEC 61131-2) | |
| FX3G24MRDS | Relay | 24 V DC (IEC 61131-2) | |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The FX3G14MRES is the device-level element in a Mitsubishi PLC controller installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in packaging machines, conveyor transfer cells, small process skids, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Mitsubishi FX3G14MRES — PLC / CPU module used as the device-level control core in an automation panel, handling logic, timing and communication tasks. The figures below are taken from the specification table on this page for catalog number FX3G14MRES; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Q.Which value is published under input type for catalog number FX3G14MRES?
For FX3G14MRES, input type is given as 24 VDC sink/source. Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering FX3G14MRES, which supply voltage entry should be checked?
The supply voltage entry quoted above is 24 V DC (IEC 61131-2). Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the certifications data for FX3G14MRES?
It is listed in the specification table for Mitsubishi FX3G14MRES as CE, UL, cULus. Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of FX3G14MRES before ordering?
Match the catalog number FX3G14MRES and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the FX3G14MRES replace the unit currently installed in my panel?
Compare catalog number FX3G14MRES and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
