Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
Mitsubishi · PLC Controller (FX / Q / L / A Series)
FX3G24MRDS is a Mitsubishi PLC controller with Output stage Relay; Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529). It is used in packaging machines, conveyor transfer cells, small process skids where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Supply voltage | 24 V DC (IEC 61131-2) |
|---|---|
| Power consumption | 21 W |
| Rated speed | 0.21 us/contact (standard) |
| I/O and communication | |
| Input type | 24 VDC sink/source |
| Output stage | Relay |
| Mechanical | |
| Dimensions (H x W x D) | 90 x 90 x 86 mm |
| Weight | 0.55 kg |
| Mounting | 35 mm DIN rail (IEC 60715) |
| Enclosure rating | IP20 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | 0...+55 °C (IEC 60068-2-1) |
| Certifications | CE, UL, cULus |
Values follow the Mitsubishi PLC Controller (FX / Q / L / A Series) specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| Mitsubishi PLC Controller (FX / Q / L / A Series) variants | |||
| Catalog number | Output stage | Supply voltage | |
|---|---|---|---|
| FX3G24MRDS (this page) | Relay | 24 V DC (IEC 61131-2) | |
| FX3G24MTDSS | Transistor (source) | 24 V DC (IEC 61131-2) | |
| FX3G24MTESS | Transistor (source) | 24 V DC (IEC 61131-2) | |
| FX3G14MRDS | Relay | 24 V DC (IEC 61131-2) | |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The FX3G24MRDS is the device-level element in a Mitsubishi PLC controller installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in packaging machines, conveyor transfer cells, small process skids, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Mitsubishi FX3G24MRDS — PLC / CPU module used as the device-level control core in an automation panel, handling logic, timing and communication tasks. The figures below are taken from the specification table on this page for catalog number FX3G24MRDS; record the nameplate data of the unit being replaced before selecting an equivalent.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Q.For FX3G24MRDS, what does the specification table state about rated speed?
The specification table lists rated speed = 0.21 us/contact (standard) for Mitsubishi FX3G24MRDS. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under certifications for catalog number FX3G24MRDS?
For FX3G24MRDS, certifications is given as CE, UL, cULus. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering FX3G24MRDS, which weight entry should be checked?
The weight entry quoted above is 0.55 kg. Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for FX3G24MRDS?
Send the full catalog number FX3G24MRDS, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Mitsubishi FX3G24MRDS.
Q.How do I confirm compatibility of FX3G24MRDS before ordering?
Match the catalog number FX3G24MRDS and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
