Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
IFM · Inductive proximity sensor
IG0083 is an IFM circuit breaker with Breaking capacity Icu/Ics no; Supply voltage 10...30 V DC (IEC 60947-5-2); Enclosure rating IP67 (IEC 60529). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Breaking capacity Icu/Ics | no |
|---|---|
| Supply voltage | 10...30 V DC (IEC 60947-5-2) |
| Frequency | 25 Hz |
| Overload capacity | no |
| Mechanical | |
| Dimensions (H x W x D) | M18 x 1 / L = 80 mm |
| Weight | 449.8 g |
| Mounting | non-flush mountable |
| Enclosure rating | IP67 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | -25...+70 °C (IEC 60068-2-1) |
| Certifications | CE, cULus |
Values follow the IFM Inductive proximity sensor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| IFM Inductive proximity sensor variants | |||
| Catalog number | Breaking capacity Icu/Ics | ||
|---|---|---|---|
| IG0083 (this page) | no | ||
| IG0087 | no | ||
| IG0006 | no | ||
| IG0011 | no | ||
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The IG0083 is the device-level element in an IFM circuit breaker installation. It receives the field signals and control supply listed above — 10...30 V DC (IEC 60947-5-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides non-flush mountable support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
IFM IG0083 — Sensor or detector for object detection, distance measurement and status feedback on production lines. The figures below are taken from the specification table on this page for catalog number IG0083; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Q.For IG0083, what does the specification table state about certifications?
The specification table lists certifications = CE, cULus for IFM IG0083. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under enclosure rating for catalog number IG0083?
For IG0083, enclosure rating is given as IP67 (IEC 60529). Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering IG0083, which dimensions (H x W x D) entry should be checked?
The dimensions (H x W x D) entry quoted above is M18 x 1 / L = 80 mm. Confirm this figure against the unit currently in the panel.
Q.What should I include in an enquiry for IG0083?
Send the full catalog number IG0083, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for IFM IG0083.
Q.How do I confirm compatibility of IG0083 before ordering?
Match the catalog number IG0083 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
