Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
IFM · Inductive proximity sensor
IG0037 is an IFM circuit breaker with Breaking capacity Icu/Ics no; Supply voltage 10...30 V DC (IEC 60947-5-2); Enclosure rating IP67 (IEC 60529). It is used in distribution boards, motor protection circuits, panel feeders where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Breaking capacity Icu/Ics | no |
|---|---|
| Supply voltage | 10...30 V DC (IEC 60947-5-2) |
| Frequency | 25 Hz |
| Overload capacity | no |
| Mechanical | |
| Dimensions (H x W x D) | M18 x 1 / L = 80 mm |
| Weight | 449.8 g |
| Mounting | non-flush mountable |
| Enclosure rating | IP67 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | -25...+70 °C (IEC 60068-2-1) |
| Certifications | CE, cULus |
Values follow the IFM Inductive proximity sensor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| IFM Inductive proximity sensor variants | |||
| Catalog number | Breaking capacity Icu/Ics | ||
|---|---|---|---|
| IG0037 (this page) | no | ||
| IG0006 | no | ||
| IG0011 | no | ||
| IG0012 | — | ||
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The IG0037 is the device-level element in an IFM circuit breaker installation. It receives the field signals and control supply listed above — 10...30 V DC (IEC 60947-5-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in distribution boards, motor protection circuits, panel feeders, where the unit is matched to the original catalog number and the enclosure provides non-flush mountable support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
IFM IG0037 — Sensor or detector for object detection, distance measurement and status feedback on production lines. The figures below are taken from the specification table on this page for catalog number IG0037; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Q.Where can I find the frequency data for IG0037?
It is listed in the specification table for IFM IG0037 as 25 Hz. Confirm this figure against the unit currently in the panel.
Q.For IG0037, what does the specification table state about mounting?
The specification table lists mounting = non-flush mountable for IFM IG0037. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under weight for catalog number IG0037?
For IG0037, weight is given as 449.8 g. Check the revision of the installed unit if the catalog number has been superseded.
Q.Can the IG0037 replace the unit currently installed in my panel?
Compare catalog number IG0037 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of IG0037 before ordering?
Match the catalog number IG0037 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
