Couldn't load pickup availability
Got questions?
Feel free to get in touch
Ask an expert!
IFM · Inductive proximity sensor
IG0012 is an IFM proximity sensor with Supply voltage 10...30 V DC; Enclosure rating IP67 (IEC 60529); Response time <= 1500 Hz switching frequency. It is used in conveyor object detection, machine guarding, position feedback where the installed unit is matched to the original catalog number and a compact, documented part is required.
| Electrical | |
| Supply voltage | 10...30 V DC |
|---|---|
| I/O and communication | |
| Response time | <= 1500 Hz switching frequency |
| Mechanical | |
| Dimensions (H x W x D) | M18 x 1 / L = 80 |
| Mounting | non-flush mountable |
| Enclosure rating | IP67 (IEC 60529) |
| Environment and compliance | |
| Operating temperature | -25...+70 °C |
| Certifications | CE, cULus |
Values follow the IFM Inductive proximity sensor specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
| IFM Inductive proximity sensor variants | |||
| Catalog number | Supply voltage | ||
|---|---|---|---|
| IG0012 (this page) | 10...30 V DC | ||
| IG0011 | 10...30 V DC (IEC 60947-5-2) | ||
| IG0013 | 10...30 V DC (IEC 60947-5-2) | ||
| IG0014 | 10...30 V DC (IEC 60947-5-2) | ||
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
The IG0012 is the device-level element in an IFM proximity sensor installation. It receives the field signals and control supply listed above — 10...30 V DC — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in conveyor object detection, machine guarding, position feedback, where the unit is matched to the original catalog number and the enclosure provides non-flush mountable support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
IFM IG0012 — Sensor or detector for object detection, distance measurement and status feedback on production lines. The figures below are taken from the specification table on this page for catalog number IG0012; verify the catalog number against your bill of materials before requesting a quotation.
Available from stock with datasheet, certificates and a quotation on request.
Q.Where can I find the dimensions (H x W x D) data for IG0012?
It is listed in the specification table for IFM IG0012 as M18 x 1 / L = 80. Confirm this figure against the unit currently in the panel.
Q.For IG0012, what does the specification table state about mounting?
The specification table lists mounting = non-flush mountable for IFM IG0012. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under enclosure rating for catalog number IG0012?
For IG0012, enclosure rating is given as IP67 (IEC 60529). Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of IG0012 before ordering?
Match the catalog number IG0012 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the IG0012 replace the unit currently installed in my panel?
Compare catalog number IG0012 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Standard (US & Canada, tracked courier): delivered in 5–8 business days. In-stock items are processed within 2–4 business days. USD 25 flat rate on orders under $500.00; free on orders of $500.00 and above.
Express (DHL Express / FedEx International): upgraded expedited delivery in 2–4 business days. The Express surcharge is calculated at checkout based on destination and order weight.
Non-Stock / On-Order items ship on request: dispatch time is confirmed before your order — see our Shipping Policy. Shipping charges and available services are displayed at checkout. See the Shipping Policy for details.
Every product is covered by a 12-month seller warranty provided by SHLY-PLC, effective from the date of delivery, against defects in materials and workmanship under normal use.
This warranty does not cover damage from misuse, improper installation, power surges, neglect, unauthorized repair, or normal wear and tear. See our Return Policy for warranty-claim instructions.
No reviews yet. Be the first to review this product!
