IFM · I/O Module
AL2241 is an IFM I/O module with Supply voltage 24 V DC (IEC 61131-2); Enclosure rating IP20 (IEC 60529); Communication ports 0.1 A. It is used in packaging machines, conveyor transfer cells, small process skids where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage24 V DC (IEC 61131-2)
-
Enclosure ratingIP20 (IEC 60529)
-
Communication ports0.1 A
-
Mounting35 mm DIN rail (IEC 60715)
Specifications
| Electrical |
| Supply voltage |
24 V DC (IEC 61131-2) |
| I/O and communication |
| Communication ports |
0.1 A |
| Response time |
< 1 ms |
| Mechanical |
| Dimensions (H x W x D) |
208 x 59.3 x 38.4 mm |
| Weight |
406 g |
| Mounting |
35 mm DIN rail (IEC 60715) |
| Enclosure rating |
IP20 (IEC 60529) |
| Environment and compliance |
| Operating temperature |
0...+55 °C (IEC 60068-2-1) |
| Storage temperature |
-25...70 °C |
| Certifications |
CE, cULus |
Values follow the IFM I/O Module specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| IFM I/O Module variants |
| Catalog number |
Supply voltage |
|
AL2241 (this page) |
24 V DC (IEC 61131-2) |
| AL2240 |
24 V DC (IEC 61131-2) |
| AL2201 |
24 V DC (IEC 61131-2) |
| AL2205 |
24 V DC (IEC 61131-2) |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The AL2241 is the device-level element in an IFM I/O module installation. It receives the field signals and control supply listed above — 24 V DC (IEC 61131-2) — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in packaging machines, conveyor transfer cells, small process skids, where the unit is matched to the original catalog number and the enclosure provides 35 mm DIN rail (IEC 60715) support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for IFM AL2241
IFM AL2241 — Industrial automation component supplied as a like-for-like replacement, selected by catalog number and published ratings. The figures below are taken from the specification table on this page for catalog number AL2241; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Storage temperature: -25...70 °C — Match it to the existing panel and upstream protection.
- Weight: 406 g — Record it with the other nameplate data when sourcing a replacement.
- Certifications: CE, cULus — Confirm the revision of the installed unit before a like-for-like replacement.
- Supply voltage: 24 V DC (IEC 61131-2) — Use it as the reference when cross-checking a current-production equivalent.
Datasheets and compliance documents are available on request; quote the full catalog number when enquiring.
Common questions about AL2241
Q.Before ordering AL2241, which communication ports entry should be checked?
The communication ports entry quoted above is 0.1 A. Confirm this figure against the unit currently in the panel.
Q.Where can I find the certifications data for AL2241?
It is listed in the specification table for IFM AL2241 as CE, cULus. Use the value as the reference when sourcing a current-production equivalent.
Q.For AL2241, what does the specification table state about supply voltage?
The specification table lists supply voltage = 24 V DC (IEC 61131-2) for IFM AL2241. Check the revision of the installed unit if the catalog number has been superseded.
Q.How do I confirm compatibility of AL2241 before ordering?
Match the catalog number AL2241 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.Can the AL2241 replace the unit currently installed in my panel?
Compare catalog number AL2241 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.