Honeywell · HMI panel
STR82D-22E02J0-GFAGG00A0-A-CDC is a Honeywell HMI panel with Supply voltage DE: 15 to 49.3 VDC; FF: 9 to 32 VDC; HART: 10.8 to 42.4 VDC; Enclosure rating Electronic Housing: Polyester Powder-Coated Aluminum (<0.4% Cu), Optional 316/316L Stainless Steel, IP66/IP67; Communication ports RS-232/422/485, Ethernet. It is used in machine operator panels, control cabinets, local HMI stations where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltageDE: 15 to 49.3 VDC; FF: 9 to 32 VDC; HART: 10.8 to 42.4 VDC
-
Enclosure ratingElectronic Housing: Polyester Powder-Coated Aluminum (<0.4% Cu), Optional 316/316L Stainless Steel, IP66/IP67
-
MountingPending confirmation from the official Honeywell data sheet
Specifications
| Electrical |
| Supply voltage |
DE: 15 to 49.3 VDC; FF: 9 to 32 VDC; HART: 10.8 to 42.4 VDC |
| Mechanical |
| Mounting |
Pending confirmation from the official Honeywell data sheet |
| Enclosure rating |
Electronic Housing: Polyester Powder-Coated Aluminum (<0.4% Cu), Optional 316/316L Stainless Steel, IP66/IP67 |
| Touch type |
Pending confirmation from the official Honeywell data sheet |
| Environment and compliance |
| Operating temperature |
-55 to +90 deg C (-67 deg F to 194 deg F) |
| Certifications |
Pending confirmation from the official Honeywell data sheet |
Values follow the Honeywell HMI panel specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The STR82D-22E02J0-GFAGG00A0-A-CDC is the device-level element in a Honeywell HMI panel installation. It receives the field signals and control supply listed above — Pending confirmation from the official Honeywell data sheet — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in machine operator panels, control cabinets, local HMI stations, where the unit is matched to the original catalog number and the enclosure provides Pending confirmation from the official Honeywell data sheet support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Honeywell STR82D-22E02J0-GFAGG00A0-A-CDC
Honeywell STR82D-22E02J0-GFAGG00A0-A-CDC — Operator panel for visualisation, parameter setting and alarm handling on a control cabinet door or console. The figures below are taken from the specification table on this page for catalog number STR82D-22E02J0-GFAGG00A0-A-CDC; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Supply voltage: DE: 15 to 49.3 VDC; FF: 9 to 32 VDC; HART: 10.8 to 42.4 VDC — Check this value against the nameplate of the installed unit before ordering.
- Mounting: Pending confirmation from the official Honeywell data sheet — Match it to the existing panel and upstream protection.
- Touch type: Pending confirmation from the official Honeywell data sheet — Record it with the other nameplate data when sourcing a replacement.
- Operating temperature: -55 to +90 deg C (-67 deg F to 194 deg F) — Confirm the revision of the installed unit before a like-for-like replacement.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about STR82D-22E02J0-GFAGG00A0-A-CDC
Q.Before ordering STR82D-22E02J0-GFAGG00A0-A-CDC, which operating temperature entry should be checked?
The operating temperature entry quoted above is Pending confirmation from the official Honeywell data sheet. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the enclosure rating data for STR82D-22E02J0-GFAGG00A0-A-CDC?
It is listed in the specification table for Honeywell STR82D-22E02J0-GFAGG00A0-A-CDC as Pending confirmation from the official Honeywell data sheet. Check the revision of the installed unit if the catalog number has been superseded.
Q.For STR82D-22E02J0-GFAGG00A0-A-CDC, what does the specification table state about mounting?
The specification table lists mounting = Pending confirmation from the official Honeywell data sheet for Honeywell STR82D-22E02J0-GFAGG00A0-A-CDC. Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for STR82D-22E02J0-GFAGG00A0-A-CDC?
Send the full catalog number STR82D-22E02J0-GFAGG00A0-A-CDC, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Honeywell STR82D-22E02J0-GFAGG00A0-A-CDC.
Q.How do I confirm compatibility of STR82D-22E02J0-GFAGG00A0-A-CDC before ordering?
Match the catalog number STR82D-22E02J0-GFAGG00A0-A-CDC and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.