Honeywell · HMI panel
STR82D-21CS000-000000000-A-AD0-11S-0-30A0-00-0000 is a Honeywell HMI panel with Supply voltage DE: 15 to 49.3 VDC; FF: 9 to 32 VDC; HART: 10.8 to 42.4 VDC; Enclosure rating Electronic Housing: Polyester Powder-Coated Aluminum (<0.4% Cu), Optional 316/316L Stainless Steel, IP66/IP67; Communication ports RS-232/422/485, Ethernet. It is used in machine operator panels, control cabinets, local HMI stations where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltageDE: 15 to 49.3 VDC; FF: 9 to 32 VDC; HART: 10.8 to 42.4 VDC
-
Enclosure ratingElectronic Housing: Polyester Powder-Coated Aluminum (<0.4% Cu), Optional 316/316L Stainless Steel, IP66/IP67
-
MountingPending confirmation from the official Honeywell data sheet
Specifications
| Electrical |
| Supply voltage |
DE: 15 to 49.3 VDC; FF: 9 to 32 VDC; HART: 10.8 to 42.4 VDC |
| Mechanical |
| Mounting |
Pending confirmation from the official Honeywell data sheet |
| Enclosure rating |
Electronic Housing: Polyester Powder-Coated Aluminum (<0.4% Cu), Optional 316/316L Stainless Steel, IP66/IP67 |
| Touch type |
Pending confirmation from the official Honeywell data sheet |
| Environment and compliance |
| Operating temperature |
-55 to +90 deg C (-67 deg F to 194 deg F) |
| Certifications |
Pending confirmation from the official Honeywell data sheet |
Values follow the Honeywell HMI panel specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The STR82D-21CS000-000000000-A-AD0-11S-0-30A0-00-0000 is the device-level element in a Honeywell HMI panel installation. It receives the field signals and control supply listed above — Pending confirmation from the official Honeywell data sheet — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in machine operator panels, control cabinets, local HMI stations, where the unit is matched to the original catalog number and the enclosure provides Pending confirmation from the official Honeywell data sheet support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Honeywell STR82D-21CS000-000000000-A-AD0-11S-0-30A0-00-0000
Honeywell STR82D-21CS000-000000000-A-AD0-11S-0-30A0-00-0000 — Operator panel for visualisation, parameter setting and alarm handling on a control cabinet door or console. The figures below are taken from the specification table on this page for catalog number STR82D-21CS000-000000000-A-AD0-11S-0-30A0-00-0000; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Touch type: Pending confirmation from the official Honeywell data sheet — Record it with the other nameplate data when sourcing a replacement.
- Operating temperature: -55 to +90 deg C (-67 deg F to 194 deg F) — Confirm the revision of the installed unit before a like-for-like replacement.
- Enclosure rating: Electronic Housing: Polyester Powder-Coated Aluminum (<0.4% Cu), Optional 316/316L Stainless Steel, IP66/IP67 — Use it as the reference when cross-checking a current-production equivalent.
- Supply voltage: DE: 15 to 49.3 VDC; FF: 9 to 32 VDC; HART: 10.8 to 42.4 VDC — Verify it in the project documentation before confirming the order.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about STR82D-21CS000-000000000-A-AD0-11S-0-30A0-00-0000
Q.Which value is published under mounting for catalog number STR82D-21CS000-000000000-A-AD0-11S-0-30A0-00-0000?
For STR82D-21CS000-000000000-A-AD0-11S-0-30A0-00-0000, mounting is given as Pending confirmation from the official Honeywell data sheet. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering STR82D-21CS000-000000000-A-AD0-11S-0-30A0-00-0000, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is Pending confirmation from the official Honeywell data sheet. Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the supply voltage data for STR82D-21CS000-000000000-A-AD0-11S-0-30A0-00-0000?
It is listed in the specification table for Honeywell STR82D-21CS000-000000000-A-AD0-11S-0-30A0-00-0000 as Pending confirmation from the official Honeywell data sheet. Compare it with the nameplate of the installed unit before ordering.
Q.Can the STR82D-21CS000-000000000-A-AD0-11S-0-30A0-00-0000 replace the unit currently installed in my panel?
Compare catalog number STR82D-21CS000-000000000-A-AD0-11S-0-30A0-00-0000 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of STR82D-21CS000-000000000-A-AD0-11S-0-30A0-00-0000 before ordering?
Match the catalog number STR82D-21CS000-000000000-A-AD0-11S-0-30A0-00-0000 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.