Honeywell · HMI panel
STR74G-11B0120-RQKRBC00K-A-AD0-11S-A-00A0-00-0000 is a Honeywell HMI panel with Supply voltage 10.8 to 42.4 VDC (IS versions limited to 30 VDC), 0 to 1,440 ohms load resistance; Enclosure rating Pending confirmation from the official Honeywell data sheet; Communication ports RS-232/422/485, Ethernet. It is used in machine operator panels, control cabinets, local HMI stations where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage10.8 to 42.4 VDC (IS versions limited to 30 VDC), 0 to 1,440 ohms load resistance
-
Enclosure ratingPending confirmation from the official Honeywell data sheet
-
MountingPending confirmation from the official Honeywell data sheet
Specifications
| Electrical |
| Supply voltage |
10.8 to 42.4 VDC (IS versions limited to 30 VDC), 0 to 1,440 ohms load resistance |
| I/O and communication |
| Response time |
Pending confirmation from the official Honeywell data sheet |
| Mechanical |
| Mounting |
Pending confirmation from the official Honeywell data sheet |
| Enclosure rating |
Pending confirmation from the official Honeywell data sheet |
| Touch type |
Pending confirmation from the official Honeywell data sheet |
| Environment and compliance |
| Operating temperature |
-55 to +90 deg C (Storage); LCD display: -20 to +70 deg C (Operation) |
| Certifications |
Pending confirmation from the official Honeywell data sheet |
Values follow the Honeywell HMI panel specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The STR74G-11B0120-RQKRBC00K-A-AD0-11S-A-00A0-00-0000 is the device-level element in a Honeywell HMI panel installation. It receives the field signals and control supply listed above — Pending confirmation from the official Honeywell data sheet — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in machine operator panels, control cabinets, local HMI stations, where the unit is matched to the original catalog number and the enclosure provides Pending confirmation from the official Honeywell data sheet support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Honeywell STR74G-11B0120-RQKRBC00K-A-AD0-11S-A-00A0-00-0000
Honeywell STR74G-11B0120-RQKRBC00K-A-AD0-11S-A-00A0-00-0000 — Operator panel for visualisation, parameter setting and alarm handling on a control cabinet door or console. The figures below are taken from the specification table on this page for catalog number STR74G-11B0120-RQKRBC00K-A-AD0-11S-A-00A0-00-0000; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Response time: Pending confirmation from the official Honeywell data sheet — Match it to the existing panel and upstream protection.
- Certifications: Pending confirmation from the official Honeywell data sheet — Record it with the other nameplate data when sourcing a replacement.
- Enclosure rating: Pending confirmation from the official Honeywell data sheet — Confirm the revision of the installed unit before a like-for-like replacement.
- Touch type: Pending confirmation from the official Honeywell data sheet — Use it as the reference when cross-checking a current-production equivalent.
Cross-check the ratings above with the installed device before confirming the order.
Common questions about STR74G-11B0120-RQKRBC00K-A-AD0-11S-A-00A0-00-0000
Q.Which value is published under certifications for catalog number STR74G-11B0120-RQKRBC00K-A-AD0-11S-A-00A0-00-0000?
For STR74G-11B0120-RQKRBC00K-A-AD0-11S-A-00A0-00-0000, certifications is given as Pending confirmation from the official Honeywell data sheet. Use the value as the reference when sourcing a current-production equivalent.
Q.Before ordering STR74G-11B0120-RQKRBC00K-A-AD0-11S-A-00A0-00-0000, which touch type entry should be checked?
The touch type entry quoted above is Pending confirmation from the official Honeywell data sheet. Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the enclosure rating data for STR74G-11B0120-RQKRBC00K-A-AD0-11S-A-00A0-00-0000?
It is listed in the specification table for Honeywell STR74G-11B0120-RQKRBC00K-A-AD0-11S-A-00A0-00-0000 as Pending confirmation from the official Honeywell data sheet. Compare it with the nameplate of the installed unit before ordering.
Q.Can the STR74G-11B0120-RQKRBC00K-A-AD0-11S-A-00A0-00-0000 replace the unit currently installed in my panel?
Compare catalog number STR74G-11B0120-RQKRBC00K-A-AD0-11S-A-00A0-00-0000 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for STR74G-11B0120-RQKRBC00K-A-AD0-11S-A-00A0-00-0000?
Send the full catalog number STR74G-11B0120-RQKRBC00K-A-AD0-11S-A-00A0-00-0000, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Honeywell STR74G-11B0120-RQKRBC00K-A-AD0-11S-A-00A0-00-0000.