Honeywell · Pressure transmitter
STG775-E1GS1A-1-A-CH0-11S-A-10A0-00-0000 is a Honeywell industrial component with Supply voltage Pending confirmation from the official Honeywell data sheet; Enclosure rating Meets Type 4X / IP66 / IP67. All stainless-steel housing is optional.; Operating temperature Pending confirmation from the official Honeywell data sheet. It is used in control panels, machine builds, spare-part replacements where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltageDE: 15 to 49.3 VDC; HART: 10.8 to 42.4 VDC
-
Enclosure ratingMeets Type 4X / IP66 / IP67. All stainless-steel housing is optional.
-
Operating temperature-40 to +85 deg C (Operating), -55 to +120 deg C (Storage)
-
MountingMounting Bracket Carbon Steel (Zinc-plated) or 304 or 316 Stainless Steel, See Figures 3 & 4
Specifications
| Electrical |
| Supply voltage |
DE: 15 to 49.3 VDC; HART: 10.8 to 42.4 VDC |
| I/O and communication |
| Communication ports |
4 to 20 mA, Honeywell DE, HART (v7.0) |
| Response time |
Pending confirmation from the official Honeywell data sheet |
| Mechanical |
| Mounting |
Mounting Bracket Carbon Steel (Zinc-plated) or 304 or 316 Stainless Steel, See Figures 3 & 4 |
| Enclosure rating |
Meets Type 4X / IP66 / IP67. All stainless-steel housing is optional. |
| Environment and compliance |
| Operating temperature |
-40 to +85 deg C (Operating), -55 to +120 deg C (Storage) |
| Certifications |
Pending confirmation from the official Honeywell data sheet |
Values follow the Honeywell Pressure transmitter specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The STG775-E1GS1A-1-A-CH0-11S-A-10A0-00-0000 is the device-level element in a Honeywell industrial component installation. It receives the field signals and control supply listed above — Pending confirmation from the official Honeywell data sheet — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in control panels, machine builds, spare-part replacements, where the unit is matched to the original catalog number and the enclosure provides Pending confirmation from the official Honeywell data sheet support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Honeywell STG775-E1GS1A-1-A-CH0-11S-A-10A0-00-0000
Honeywell STG775-E1GS1A-1-A-CH0-11S-A-10A0-00-0000 — Operator panel for visualisation, parameter setting and alarm handling on a control cabinet door or console. The figures below are taken from the specification table on this page for catalog number STG775-E1GS1A-1-A-CH0-11S-A-10A0-00-0000; size the surrounding wiring and upstream protection to these published ratings rather than to a generic assumption.
- Communication ports: 4 to 20 mA, Honeywell DE, HART (v7.0) — Check this value against the nameplate of the installed unit before ordering.
- Response time: Pending confirmation from the official Honeywell data sheet — Match it to the existing panel and upstream protection.
- Certifications: Pending confirmation from the official Honeywell data sheet — Record it with the other nameplate data when sourcing a replacement.
- Supply voltage: DE: 15 to 49.3 VDC; HART: 10.8 to 42.4 VDC — Confirm the revision of the installed unit before a like-for-like replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about STG775-E1GS1A-1-A-CH0-11S-A-10A0-00-0000
Q.For STG775-E1GS1A-1-A-CH0-11S-A-10A0-00-0000, what does the specification table state about operating temperature?
The specification table lists operating temperature = Pending confirmation from the official Honeywell data sheet for Honeywell STG775-E1GS1A-1-A-CH0-11S-A-10A0-00-0000. Check the revision of the installed unit if the catalog number has been superseded.
Q.Which value is published under supply voltage for catalog number STG775-E1GS1A-1-A-CH0-11S-A-10A0-00-0000?
For STG775-E1GS1A-1-A-CH0-11S-A-10A0-00-0000, supply voltage is given as Pending confirmation from the official Honeywell data sheet. Compare it with the nameplate of the installed unit before ordering.
Q.Before ordering STG775-E1GS1A-1-A-CH0-11S-A-10A0-00-0000, which response time entry should be checked?
The response time entry quoted above is Pending confirmation from the official Honeywell data sheet. Confirm this figure against the unit currently in the panel.
Q.Can the STG775-E1GS1A-1-A-CH0-11S-A-10A0-00-0000 replace the unit currently installed in my panel?
Compare catalog number STG775-E1GS1A-1-A-CH0-11S-A-10A0-00-0000 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.How do I confirm compatibility of STG775-E1GS1A-1-A-CH0-11S-A-10A0-00-0000 before ordering?
Match the catalog number STG775-E1GS1A-1-A-CH0-11S-A-10A0-00-0000 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.