Honeywell · HMI panel
STG740-E1GS4A-1-0-AHC-11S-A-20-A0-00-0000 is a Honeywell HMI panel with Supply voltage DE: 15 to 49.3 VDC; HART: 10.8 to 42.4 VDC; Enclosure rating Meets Type 4X / IP66 / IP67. All stainless-steel housing is optional.; Communication ports RS-232/422/485, Ethernet. It is used in machine operator panels, control cabinets, local HMI stations where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltageDE: 15 to 49.3 VDC; HART: 10.8 to 42.4 VDC
-
Enclosure ratingMeets Type 4X / IP66 / IP67. All stainless-steel housing is optional.
-
MountingMounting Bracket Carbon Steel (Zinc-plated) or 304 or 316 Stainless Steel, See Figures 3 & 4
Specifications
| Electrical |
| Supply voltage |
DE: 15 to 49.3 VDC; HART: 10.8 to 42.4 VDC |
| I/O and communication |
| Response time |
Pending confirmation from the official Honeywell data sheet |
| Mechanical |
| Mounting |
Mounting Bracket Carbon Steel (Zinc-plated) or 304 or 316 Stainless Steel, See Figures 3 & 4 |
| Enclosure rating |
Meets Type 4X / IP66 / IP67. All stainless-steel housing is optional. |
| Touch type |
Pending confirmation from the official Honeywell data sheet |
| Environment and compliance |
| Operating temperature |
-40 to +85 deg C (Operating), -55 to +120 deg C (Storage) |
| Certifications |
Pending confirmation from the official Honeywell data sheet |
Values follow the Honeywell HMI panel specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The STG740-E1GS4A-1-0-AHC-11S-A-20-A0-00-0000 is the device-level element in a Honeywell HMI panel installation. It receives the field signals and control supply listed above — Pending confirmation from the official Honeywell data sheet — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in machine operator panels, control cabinets, local HMI stations, where the unit is matched to the original catalog number and the enclosure provides Pending confirmation from the official Honeywell data sheet support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Honeywell STG740-E1GS4A-1-0-AHC-11S-A-20-A0-00-0000
Honeywell STG740-E1GS4A-1-0-AHC-11S-A-20-A0-00-0000 — Operator panel for visualisation, parameter setting and alarm handling on a control cabinet door or console. The figures below are taken from the specification table on this page for catalog number STG740-E1GS4A-1-0-AHC-11S-A-20-A0-00-0000; confirm the installed unit's part number and revision so the replacement matches both electrically and mechanically.
- Response time: Pending confirmation from the official Honeywell data sheet — Check this value against the nameplate of the installed unit before ordering.
- Certifications: Pending confirmation from the official Honeywell data sheet — Match it to the existing panel and upstream protection.
- Operating temperature: -40 to +85 deg C (Operating), -55 to +120 deg C (Storage) — Record it with the other nameplate data when sourcing a replacement.
- Touch type: Pending confirmation from the official Honeywell data sheet — Confirm the revision of the installed unit before a like-for-like replacement.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about STG740-E1GS4A-1-0-AHC-11S-A-20-A0-00-0000
Q.Before ordering STG740-E1GS4A-1-0-AHC-11S-A-20-A0-00-0000, which operating temperature entry should be checked?
The operating temperature entry quoted above is Pending confirmation from the official Honeywell data sheet. Check the revision of the installed unit if the catalog number has been superseded.
Q.Where can I find the supply voltage data for STG740-E1GS4A-1-0-AHC-11S-A-20-A0-00-0000?
It is listed in the specification table for Honeywell STG740-E1GS4A-1-0-AHC-11S-A-20-A0-00-0000 as Pending confirmation from the official Honeywell data sheet. Compare it with the nameplate of the installed unit before ordering.
Q.For STG740-E1GS4A-1-0-AHC-11S-A-20-A0-00-0000, what does the specification table state about mounting?
The specification table lists mounting = Pending confirmation from the official Honeywell data sheet for Honeywell STG740-E1GS4A-1-0-AHC-11S-A-20-A0-00-0000. Confirm this figure against the unit currently in the panel.
Q.How do I confirm compatibility of STG740-E1GS4A-1-0-AHC-11S-A-20-A0-00-0000 before ordering?
Match the catalog number STG740-E1GS4A-1-0-AHC-11S-A-20-A0-00-0000 and the specification values listed above against the installed unit, then confirm the firmware or hardware revision where a revision-sensitive part is involved.
Q.What should I include in an enquiry for STG740-E1GS4A-1-0-AHC-11S-A-20-A0-00-0000?
Send the full catalog number STG740-E1GS4A-1-0-AHC-11S-A-20-A0-00-0000, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Honeywell STG740-E1GS4A-1-0-AHC-11S-A-20-A0-00-0000.