Honeywell · HMI panel
STD730-E1HS6AS-1-A-AHC-11S-A-60A6-TP-0000 is a Honeywell HMI panel with Supply voltage 10.8 to 42.4 VDC at terminals (IS versions limited to 30 VDC); Enclosure rating Meets Type 4X / IP66 / IP67. All stainless-steel housing is optional.; Communication ports RS-232/422/485, Ethernet. It is used in machine operator panels, control cabinets, local HMI stations where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltage10.8 to 42.4 VDC at terminals (IS versions limited to 30 VDC)
-
Enclosure ratingMeets Type 4X / IP66 / IP67. All stainless-steel housing is optional.
-
Mounting2” Pipe, Carbon Steel (Zinc-plated), 304 Stainless Steel or 316 Stainless Steel
Specifications
| Electrical |
| Supply voltage |
10.8 to 42.4 VDC at terminals (IS versions limited to 30 VDC) |
| I/O and communication |
| Response time |
Pending confirmation from the official Honeywell data sheet |
| Mechanical |
| Mounting |
2” Pipe, Carbon Steel (Zinc-plated), 304 Stainless Steel or 316 Stainless Steel |
| Enclosure rating |
Meets Type 4X / IP66 / IP67. All stainless-steel housing is optional. |
| Touch type |
Pending confirmation from the official Honeywell data sheet |
| Environment and compliance |
| Operating temperature |
-40 to 85 °C (Rated Condition and Operative Limits); -55 to 120 °C (Transportation and Storage) |
| Certifications |
Pending confirmation from the official Honeywell data sheet |
Values follow the Honeywell HMI panel specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Honeywell HMI panel variants |
| Catalog number |
Supply voltage |
|
STD730-E1HS6AS-1-A-AHC-11S-A-60A6-TP-0000 (this page) |
Pending confirmation from the official Honeywell data sheet |
| STD725-E1HK2AS-1-A-AHT-11S-A-30A6-FX-F3-TP-PM-0000 |
Pending confirmation from the official Honeywell data sheet |
| STD120-E1H |
Pending confirmation from the official Honeywell data sheet |
| STD120-E1H-00000-1C-S2 |
Pending confirmation from the official Honeywell data sheet |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The STD730-E1HS6AS-1-A-AHC-11S-A-60A6-TP-0000 is the device-level element in a Honeywell HMI panel installation. It receives the field signals and control supply listed above — Pending confirmation from the official Honeywell data sheet — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in machine operator panels, control cabinets, local HMI stations, where the unit is matched to the original catalog number and the enclosure provides Pending confirmation from the official Honeywell data sheet support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Honeywell STD730-E1HS6AS-1-A-AHC-11S-A-60A6-TP-0000
Honeywell STD730-E1HS6AS-1-A-AHC-11S-A-60A6-TP-0000 — Operator panel for visualisation, parameter setting and alarm handling on a control cabinet door or console. The figures below are taken from the specification table on this page for catalog number STD730-E1HS6AS-1-A-AHC-11S-A-60A6-TP-0000; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Touch type: Pending confirmation from the official Honeywell data sheet — Verify it in the project documentation before confirming the order.
- Response time: Pending confirmation from the official Honeywell data sheet — Check this value against the nameplate of the installed unit before ordering.
- Enclosure rating: Meets Type 4X / IP66 / IP67. All stainless-steel housing is optional. — Match it to the existing panel and upstream protection.
- Mounting: 2” Pipe, Carbon Steel (Zinc-plated), 304 Stainless Steel or 316 Stainless Steel — Record it with the other nameplate data when sourcing a replacement.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about STD730-E1HS6AS-1-A-AHC-11S-A-60A6-TP-0000
Q.Before ordering STD730-E1HS6AS-1-A-AHC-11S-A-60A6-TP-0000, which touch type entry should be checked?
The touch type entry quoted above is Pending confirmation from the official Honeywell data sheet. Compare it with the nameplate of the installed unit before ordering.
Q.Where can I find the enclosure rating data for STD730-E1HS6AS-1-A-AHC-11S-A-60A6-TP-0000?
It is listed in the specification table for Honeywell STD730-E1HS6AS-1-A-AHC-11S-A-60A6-TP-0000 as Pending confirmation from the official Honeywell data sheet. Confirm this figure against the unit currently in the panel.
Q.For STD730-E1HS6AS-1-A-AHC-11S-A-60A6-TP-0000, what does the specification table state about operating temperature?
The specification table lists operating temperature = Pending confirmation from the official Honeywell data sheet for Honeywell STD730-E1HS6AS-1-A-AHC-11S-A-60A6-TP-0000. Use the value as the reference when sourcing a current-production equivalent.
Q.Can the STD730-E1HS6AS-1-A-AHC-11S-A-60A6-TP-0000 replace the unit currently installed in my panel?
Compare catalog number STD730-E1HS6AS-1-A-AHC-11S-A-60A6-TP-0000 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for STD730-E1HS6AS-1-A-AHC-11S-A-60A6-TP-0000?
Send the full catalog number STD730-E1HS6AS-1-A-AHC-11S-A-60A6-TP-0000, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Honeywell STD730-E1HS6AS-1-A-AHC-11S-A-60A6-TP-0000.