Honeywell · HMI panel
STA840-E1GS4B-1-A-AD0-11S-A-20A0-00-0000 is a Honeywell HMI panel with Supply voltage DE: 15 to 49.3 VDC; FF: 9 to 32 VDC; HART: 10.8 to 42.4 VDC; Enclosure rating Meets Type 4X / IP66 / IP67. All stainless-steel housing is optional.; Communication ports RS-232/422/485, Ethernet. It is used in machine operator panels, control cabinets, local HMI stations where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltageDE: 15 to 49.3 VDC; FF: 9 to 32 VDC; HART: 10.8 to 42.4 VDC
-
Enclosure ratingMeets Type 4X / IP66 / IP67. All stainless-steel housing is optional.
-
MountingCarbon Steel (Zinc-plated) or 304 Stainless Steel or 316 Stainless Steel. See Figure 4 & Figure 5
Specifications
| Electrical |
| Supply voltage |
DE: 15 to 49.3 VDC; FF: 9 to 32 VDC; HART: 10.8 to 42.4 VDC |
| Mechanical |
| Mounting |
Carbon Steel (Zinc-plated) or 304 Stainless Steel or 316 Stainless Steel. See Figure 4 & Figure 5 |
| Enclosure rating |
Meets Type 4X / IP66 / IP67. All stainless-steel housing is optional. |
| Touch type |
Pending confirmation from the official Honeywell data sheet |
| Environment and compliance |
| Operating temperature |
-40 to +85 deg C (Ambient); -55 to +125 deg C (Meter Body, Model Dependent) |
| Certifications |
Pending confirmation from the official Honeywell data sheet |
Values follow the Honeywell HMI panel specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Honeywell HMI panel variants |
| Catalog number |
Supply voltage |
|
STA840-E1GS4B-1-A-AD0-11S-A-20A0-00-0000 (this page) |
Pending confirmation from the official Honeywell data sheet |
| STA940-E1G-00000-1C-XXXX |
Pending confirmation from the official Honeywell data sheet |
| ST7800-A-1013 |
Pending confirmation from the official Honeywell data sheet |
| STD120-E1H |
Pending confirmation from the official Honeywell data sheet |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The STA840-E1GS4B-1-A-AD0-11S-A-20A0-00-0000 is the device-level element in a Honeywell HMI panel installation. It receives the field signals and control supply listed above — Pending confirmation from the official Honeywell data sheet — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in machine operator panels, control cabinets, local HMI stations, where the unit is matched to the original catalog number and the enclosure provides Pending confirmation from the official Honeywell data sheet support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Honeywell STA840-E1GS4B-1-A-AD0-11S-A-20A0-00-0000
Honeywell STA840-E1GS4B-1-A-AD0-11S-A-20A0-00-0000 — Operator panel for visualisation, parameter setting and alarm handling on a control cabinet door or console. The figures below are taken from the specification table on this page for catalog number STA840-E1GS4B-1-A-AD0-11S-A-20A0-00-0000; record the nameplate data of the unit being replaced before selecting an equivalent.
- Enclosure rating: Meets Type 4X / IP66 / IP67. All stainless-steel housing is optional. — Use it as the reference when cross-checking a current-production equivalent.
- Supply voltage: DE: 15 to 49.3 VDC; FF: 9 to 32 VDC; HART: 10.8 to 42.4 VDC — Verify it in the project documentation before confirming the order.
- Certifications: Pending confirmation from the official Honeywell data sheet — Check this value against the nameplate of the installed unit before ordering.
- Mounting: Carbon Steel (Zinc-plated) or 304 Stainless Steel or 316 Stainless Steel. See Figure 4 & Figure 5 — Match it to the existing panel and upstream protection.
Available from stock with datasheet, certificates and a quotation on request.
Common questions about STA840-E1GS4B-1-A-AD0-11S-A-20A0-00-0000
Q.For STA840-E1GS4B-1-A-AD0-11S-A-20A0-00-0000, what does the specification table state about certifications?
The specification table lists certifications = Pending confirmation from the official Honeywell data sheet for Honeywell STA840-E1GS4B-1-A-AD0-11S-A-20A0-00-0000. Use the value as the reference when sourcing a current-production equivalent.
Q.Which value is published under touch type for catalog number STA840-E1GS4B-1-A-AD0-11S-A-20A0-00-0000?
For STA840-E1GS4B-1-A-AD0-11S-A-20A0-00-0000, touch type is given as Pending confirmation from the official Honeywell data sheet. Check the revision of the installed unit if the catalog number has been superseded.
Q.Before ordering STA840-E1GS4B-1-A-AD0-11S-A-20A0-00-0000, which enclosure rating entry should be checked?
The enclosure rating entry quoted above is Pending confirmation from the official Honeywell data sheet. Compare it with the nameplate of the installed unit before ordering.
Q.What should I include in an enquiry for STA840-E1GS4B-1-A-AD0-11S-A-20A0-00-0000?
Send the full catalog number STA840-E1GS4B-1-A-AD0-11S-A-20A0-00-0000, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Honeywell STA840-E1GS4B-1-A-AD0-11S-A-20A0-00-0000.
Q.Can the STA840-E1GS4B-1-A-AD0-11S-A-20A0-00-0000 replace the unit currently installed in my panel?
Compare catalog number STA840-E1GS4B-1-A-AD0-11S-A-20A0-00-0000 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.