Honeywell · HMI panel
ST7800-A-1013 is a Honeywell HMI panel with Supply voltage Pending confirmation from the official Honeywell data sheet; Enclosure rating Pending confirmation from the official Honeywell data sheet; Communication ports RS-232/422/485, Ethernet. It is used in machine operator panels, control cabinets, local HMI stations where the installed unit is matched to the original catalog number and a compact, documented part is required.
-
Supply voltagePending confirmation from the official Honeywell data sheet
-
Enclosure ratingPending confirmation from the official Honeywell data sheet
-
MountingPending confirmation from the official Honeywell data sheet
Specifications
| Electrical |
| Supply voltage |
Pending confirmation from the official Honeywell data sheet |
| Mechanical |
| Mounting |
Pending confirmation from the official Honeywell data sheet |
| Enclosure rating |
Pending confirmation from the official Honeywell data sheet |
| Touch type |
Pending confirmation from the official Honeywell data sheet |
| Environment and compliance |
| Operating temperature |
Pending confirmation from the official Honeywell data sheet |
| Certifications |
Pending confirmation from the official Honeywell data sheet |
Values follow the Honeywell HMI panel specification for this catalog number; parameters not confirmed for this variant are omitted rather than estimated.
Model comparison in the same family
| Honeywell HMI panel variants |
| Catalog number |
Supply voltage |
|
ST7800-A-1013 (this page) |
Pending confirmation from the official Honeywell data sheet |
| STA840-E1GS4B-1-A-AD0-11S-A-20A0-00-0000 |
Pending confirmation from the official Honeywell data sheet |
| STA940-E1G-00000-1C-XXXX |
Pending confirmation from the official Honeywell data sheet |
| STD120-E1H |
Pending confirmation from the official Honeywell data sheet |
Before selecting an alternative, confirm its dimensions, terminals and installation requirements in the manufacturer documentation.
Where it sits in the control system
The ST7800-A-1013 is the device-level element in a Honeywell HMI panel installation. It receives the field signals and control supply listed above — Pending confirmation from the official Honeywell data sheet — and switches or conditions the load within the the rated ratings shown in the Specifications table. Wiring and protective devices are sized to those same numbers, not to a generic assumption.
Typical installations place it in machine operator panels, control cabinets, local HMI stations, where the unit is matched to the original catalog number and the enclosure provides Pending confirmation from the official Honeywell data sheet support. Record the catalog number and revision from the nameplate of the installed unit before specifying a like-for-like spare.
Selection notes for Honeywell ST7800-A-1013
Honeywell ST7800-A-1013 — Operator panel for visualisation, parameter setting and alarm handling on a control cabinet door or console. The figures below are taken from the specification table on this page for catalog number ST7800-A-1013; always cross-check the catalog number and hardware revision on the nameplate before placing an order.
- Mounting: Pending confirmation from the official Honeywell data sheet — Confirm the revision of the installed unit before a like-for-like replacement.
- Certifications: Pending confirmation from the official Honeywell data sheet — Use it as the reference when cross-checking a current-production equivalent.
- Operating temperature: Pending confirmation from the official Honeywell data sheet — Verify it in the project documentation before confirming the order.
- Supply voltage: Pending confirmation from the official Honeywell data sheet — Check this value against the nameplate of the installed unit before ordering.
For a discontinued unit, match function and electrical ratings rather than the label alone.
Common questions about ST7800-A-1013
Q.Before ordering ST7800-A-1013, which mounting entry should be checked?
The mounting entry quoted above is Pending confirmation from the official Honeywell data sheet. Use the value as the reference when sourcing a current-production equivalent.
Q.Where can I find the certifications data for ST7800-A-1013?
It is listed in the specification table for Honeywell ST7800-A-1013 as Pending confirmation from the official Honeywell data sheet. Check the revision of the installed unit if the catalog number has been superseded.
Q.For ST7800-A-1013, what does the specification table state about enclosure rating?
The specification table lists enclosure rating = Pending confirmation from the official Honeywell data sheet for Honeywell ST7800-A-1013. Compare it with the nameplate of the installed unit before ordering.
Q.Can the ST7800-A-1013 replace the unit currently installed in my panel?
Compare catalog number ST7800-A-1013 and the ratings above with the nameplate of the installed device. A current-production equivalent is selected by function and electrical rating, not by the label alone.
Q.What should I include in an enquiry for ST7800-A-1013?
Send the full catalog number ST7800-A-1013, the required quantity and a photo of the nameplate. Stock, lead time and the applicable compliance documents can then be confirmed for Honeywell ST7800-A-1013.